Viewing all customer Discussions for:

82-265 Multi-Point Mortise Lock with Face Plate, 11"

I just called .. OK that didn't work 82-249 I need the plate that this lock latches into please, what I currently have does not depress the button that allows the lock to engage. Thank youJane

We recently purchased the patio door handle/lock, part #82-086 (fit perfect, works great, EXCEPT, the idiot that rehabbed this door used the wrong keeper...Does part #82-249, Keeper, work with the door handle/lock set we purchased? If not, what keeper will we require so that we can lock the door wi ... (cont.)

I have a dual sliding glass door set up. 2260 locking lever on left side and just handles on the right side. The latch to lock and unlock has become non-functional and requires minutes of jiggling to get to open. Interior assembly has an upper and lower latch. I wanted to see if this handle set ... (cont.)

Need help replacing a sliding door lock. Not sure what I need. Thanks!

There are no marking whatsoever on the latch/lock, other than "Pat. Pend." Which obviously isn't helpful. I've supplied dimensions in hopes you can tell me exactly what part I need. As of this morning, I was unable to lock my siding glass deck door and upon inspection, a small piece of broken metal ... (cont.)

Hello, I have a Jeld Wen sliding glass door, and I would like to convert the handle to an exterior keyed locking handle. The spacing on the screw holes is 3-15/16". What options would work for me? The door is 1-1/2" thick. Thanks

I am wondering if you have the same lock as the one pictured? Looks similar to the 82-265 mortise lock but the dimensions might be a tad off. Thanks for your help!!!

I received my new double mortise lock replacement. It matches with my old keeper, however; the keeper has an indention where the lock release button would hit it and it will not connect. Do you have the keeper for the 82-265?

Mine is closer to 9.75" at the screw fastener compared to this 11" Can you help? I found you guys from the two patent #'s

Need a locking patio door handle replacement. External and internal handles. Silver Line numbers are 8002344228 also 13165930-2 and CCL#440-H-049-12. Mounting holes (screws) are 4" apart. Can you identify with this information and offer a replacement? Greatly appreciate you assistance. Many thanks. ... (cont.)

We have what I believe to be a legacy handle on our Lincoln sliding glass door. Do we need to replace the entire handle or just the inside locking mechanism? Also a screw is missing from the handle on the inside which we have not been able to find a working replacement at local hardware stores. I ... (cont.)

I received my new lock, it seems like it should be the one, however; the face plate I had previously didn't have a lock release button and this one does. Do you sell the face plate for the 82-239?

Hi i have door Guadian geneva , NY ANSI z97.1-2009 15 CFR 1201 II Safety tempered Socc 2259 1/8 UA CAM /0008-121-M I need the same mechanism for the lock Same in the picture

The 82-265 seems to be what I need but it's tough to determine from the image if the alignment of the lock is correct and if the striker matches up to my keeper. Screw holes are at 11", the Mortise locks are at 5 11/16" Please review attached photos and provide a confirmation or recommendation, tha ... (cont.)

The sticker says Keystone 5500 Looks similar to your part 82 265

Would you be able to provide a replacement lock part number for the above referenced patio door?

Need to replace lock upper latching bolt will not retract. From the number glass it looks like the door was manufactured in 10/2013.

I haven't removed this mortise lock yet, but based on these two photos, do you think the product MULTI-POINT MORTISE LOCK WITH FACE PLATE, 11"Product Code: 82-265 may be the right part?I can take more photos when I have removed it from the door.Thanks,Richard

the serial number on the door is 9678069501 0001, Need to replace handle and inside the frame lock mechanism.

I would like a handle that is just like this with a keylock. The screws looked like 3 15/16. The handle looks like close to 10". The plate with double mortise is at 11.5".