Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

Inch-long and hole is approximately at 1 7/16 in was there a number for stamped on it

6 stamped on both coils. coils seem fine just think we need new shoe and pivot bars, although coils are damaged in another unit.

I sent a picture of the sticker on the window as well as the pieces of the windows that are broken. Do you know if you have these replacement parts available? I would most likely need around 20 of these replacement parts. Thank you for your help.

pivot arm from window world double hung window

I'm looking for a coil balance cover and two tilt pivot pins. I included a picture of the coil balance and the clutch shoe for reference.

I managed to break my pivot bars and cams in the pivot shoes when removing my 2004 series 0901 double hung vinyl windows (maker unknown), constant force coil balance, to fix a broken pane of glass. Looking to find the right replacements for the shoes (1/2"D x 1 1/4"W x 1 1/2"H) and bars (2 5/8"L, si ... (cont.)

I dont know the brand of window. Sorry. I bought house to be a rental. I dont live there. Can make arrangements to go back to look again if necessary, but I hope I dont have to. I think both top and bottom of windows can move up and down. Only the bottom can tilt in. The part that is broken ... (cont.)

Has spiral balances. I would also need the adjustment tool and possibly some spiral balances

Window is associated materials need pivot bar 21/4 inches it will fit into the 15-177 shoe also will replace the coil balance existing is stamped 10 the window weighs 20 lbs. I have used your s152 coils on other smaller windows but I don't see any s152-10 thanks for your help

I am looking for this part or a replacement part. Double hung vinyl window installed around 1998.

I am in need of 25 of these pins but need to make sure I am ordering the correct one

Need assistance with identifying this part.

Hi, I need to replace pivot pin for Unilever window. I have attached phots with ruler for reference. It looks like if I can get the correct head I can cut and drill if I need, i.e., customize the pin. Thanks in in advance for your assistance with this.Warm regards,Craig

I need 2ea of this pivot bar. Do you carry any?

I need 2 of these window pivot pins. I cant find a brand anywhere on the windows to help narrow down a pin. Hopefully you can help even if I have to modify it slightly. Thank you Mark W

The window needs hardware to be able to stay up or down normally. I believe needs two Pivot bars and two pivot lock shoes. I truly appreciate your help on this before I purchase anything. Thank you very muchGuillermo

2 3/4" long Screw hole at 1 7/16" Round head 3/8" Rectangle head 1/4" I could not find this particular pivot bar on your list. It does have a number 8 marking as shown in the photos.

I need four pivot bars as shown. OAL is 2 11/16".

This is from a Polaris window pivot bar. It broke off at the second screw hole. It is from the 7020 series double hung window. The bar sticks out about 3/4" from the underneath of the window. Any help would be greatly appreciated. I have included a picture of what it looks like from a working w ... (cont.)

Looking for a replacement part. Seems to be about 3 inches.