Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

These windows were installed in 1999,2000 by a manufacturer in Burlington/Toronto area. The force balancers have broken/snapped as well as some of the brass (?) parts that are attached under the window and catch the force balancer that enable the window to open inwards on a hinge. Are you able to ... (cont.)

generic windows with no identification. Broken are these pivot arms that are located in the lower position in all double hung windows in this home. There are a couple broken. Can anyone help me find replacements?

Greetings, I am needing to replace pivot bars in my mother's home, some of the windows have not been opened regularly,at be cause. I am sending info that I found on the frame. Thanks for your help.

i think i have 140 coil balances they are single coil they are not marked that i can see I measured the window sash will that help in getting the correct size coil

I purchased the S140-11. However, my pivot bars dont fit.My pivot bar is 26-226. But, I need the complete coil balance and shoe as I the old ones are shot.

I have an Alside Centurion window that will not stay up. When I pulled the lower sash out I discovered that there where no pins. The pivot bar from a good window was removed and some photos were taken to help identify the parts needed. The overall length is about 2 3/4". From the cap to the hole is ... (cont.)

Can you please let me know if you carry any of these ?

Coil balances,DL stamped on coil, for Sunset Glass in San Francisco Ca. 1/2" Thick x 1-1/4", Early 2000-2004, "Viking" Double Hungs - Wayne

I believe Alside/Associated Materials UltraMax vinyl, double-paned windows were installed circa 2000 throughout my house. Several of the coil balance shoes are broken and one of the pivot bars is broken. I believe I have identified the necessary repair parts, but would like some confirmation before ... (cont.)

I know you have a lot of pivot bars, but I can't find this one. the mounting screw is 1-5/8" from the head.

Good morning, Attached, please find two photos I've taken in an attempt to identify my broken window sash. Here's what happened: I think I attempted to tilt the window before lifting it up high enough. As a result, I broke the two C-shaped brackets that usually travel in the track with the b ... (cont.)

I am looking to replace the coil balances on several windows. They are all Pella double-hung, tilt-in and use the same style hardware, though they are different sizes and weights. I don

The attached PDF contains dimensions and picture of a window pivot that broke on a replacement window that was installed in a church. I do not know what window brand and only have the part with me right now. I checked around town some and did not find this exact part. If there is something close ... (cont.)

I need to find the replace part of this pivot shoe of my window, can you help to find which is the correct model to use? Also what is the right pivot bar to use with it? Thanks, Annie

Last year I purchased a pair of your balances after sending a photo. I just got around to installing and the (existing) rod that rests in the metal part of the balance doesn't fit. You can see from the photos there's a ridge on the old rod and the required part should be just a rectangle without the ... (cont.)

Hi Jodi, Attached are pictures of my replacement window parts. The pin is broken, I actually have two windows with broken pins. The windows are, "Alside Windows", Centurion style and purchased in 2004. Do you have replacement parts and can you walk me through how to repair my windows? I re ... (cont.)

I am wondering if you can help me. Please see the attached photos. Is this a part you stock? They for a vinyl window. Please do not hesitate to contact me with any questions.

I am a small time northern window installer. I have a customer who has several double hung windows with broken parts tot he point that the windows fall out and have to be taped shut. They have approached me to help them fix rather than replace their windows. Since the frames are fine and the ... (cont.)

I'm trying to find the right piece for a broken window. I think it may be a pivot bar, but am not sure. The pictures show the metal piece that snapped from the bottom of the window.

I have Bonneville double hung vinyl windows and a multitude of pivot shoes are broken. I purchased 4 pivot shoes (15-105) from you recently and replaced two on a lower sash. What I did not measure very well was the pivot bar for this window. I cannot locate the same pivot shoe and not sure if a new ... (cont.)