Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

Hi guys,Thanks for looking at my part ID request.Cheers,Karl

Please assist with identification. I accidentally removed myself from the conversation ! Quantity 20 - DB-102-2730 Quantity 4 - DB-102-2520

I am missing the bottom clip and string is no longer working

The Windows Channel Balance is 28 inches long and 1/2 inch wide. I see number 2730 BSI CL stamped on the metal - see picture. Please let me know what part I need to order from your website.

The old part measures 28"

I'm looking for 4 BFS window channel balance replacements. Stamped on the side is 27-6 and it's 28 inches long (measured only the metal part). There are several options when I look at your parts and don't know which ones to order. Attached are pictures of the broken balance. Hope the pictures help. ... (cont.)

I did not find any identifying marksThank you for your information online

28" 27 4 LV CMC 7Looking for replacement channel balances for my 16-year-old windows, which part do I order from your catalog?

Hello - I'm looking to replace the channel balance assembly in multiple windows in my home that are all failing. I took one out which has "2740" etched in the side. A photo of the light brown plastic inserts on the top and bottom are attached. There are also some black plastic inserts at the top ... (cont.)

Hello,I need help determining which balances would work for these windows. The glass etching says they are Herculite. The balance numbers are different than what I am used to seeing so I'm hoping you will know what will work. Here are all the numbered balances;1) Entry. 21 2 Bsi oe ... (cont.)

2740 BSI DJ

It appears that my Alenco window channel balance is broken. The number on the channel balance is "2720". It is 1/2" wide and I think (because it's mostly exposed) is most likely 27" long. Do you have replacement Channel Balances? I would probably order 2 and repace both at the same time. Thanks ... (cont.)

The stamp on the channel balance is "b 2730" with 28" length. The snap-in glazing is 3/4 tall, but the top width is short of 3/8" a bit. Would you please help me verify if these two parts are correct? Balance: S395-28 Snap-in glazing: 55-261 Thanks, Mary

The attached photos show a channel balance stamped with 2790. The sash weighs 30.8lbs and is for a non-tilt window. The channel balance is 9/16" wide (1/2"). If I am using the part finder found on the website correctly, it appears to be a 28" S395 with a 2760 stamp option. Is this correct? ... (cont.)

Good morning I want to buy a window channel balance to replace a broken one, but can't figure out which one. I have uploaded several pictures The metal channel measures .5" x .62" x 28", without plastic parts, and is stamped 2730 GM on one end

Hello Swisco team! 1st off, thx for your helpfull video on removing my sash, which wasn't working. Turns out the string broke in one of the channel balalances. See photos. Do I need a new channel balance or can the string be replaced? This is a late 1990's alenco single hung aluminum window. Thanks ... (cont.)

The part I have measures 28" long with out the plastic ends. It has marking of "2740 B.S.I" Our windows are metal with no names on them. Several windows need the channel ballances replaced. Thanks for your help.

Original window manufacturer; Alenco 1999 or 2000.I am thinking that the top guide is a 19-005 and the bottom guide is a 15-001. The dimensions all fit except the depth of the shoe on the bottom is not a full 1 1/8" like a 15-001, but it is more than 1" like the 15-002. I think that reflects 18 year ... (cont.)

Needing too replace two of these (pictured). Windows are approximately 12 years old. Do not know the manufacturer. Markings on channel are 27 9 DX CMC 11. Channel is 28?. Can you help?

Spec's: Fisher Window 1/2" by 29" balance 27 4 CV CMC 7 printed on the balance Window weighs 30# House built in 2002