Viewing all customer Discussions for:

S395-28 28" Series 395 Channel Balance

I need 1 set of each 2730 2740

Hi, Looking for replacement parts for my broken balance. It is 1/2" wide and 28" long. 2790 BSI LH31 is engraved on it. My sash weighs about 30 pounds. Wonder if you can advise me on the part from your catalog that would replace my old balance? Thanks in advance, Alexander.

28 inches in length, 1/2 inch width, stamped "27-4" Strings have separated from clips

16 year-old home. Non-tilt metal windows. Unknown make but assume Alenco since my top sash guide matches your catalog part. My balance (9/16" x 28") matches your picture for S395 but my bottom shoe is 1 3/16" deep instead of 1 1/8". Should I assume difference is due to wear?

Hi, Please help me order right part. 28" channel balance with stamp 2740 At one end(near spring attachment), I see plastic part has wing. Plastic part at the other end(near pulley) does not have wing. Please let me know if I need to send more picture for clarify.

Pls. let me know which channel balance do I need to buy?

The number stamp on the balancer is 2730

I have older Alenco double hung windows installed in my home in 1996. The number on the spring assist is 2720. I've attached pictures of the assembly and guides on each end. Which product do you carry that will work with my windows. Thanks

The metal rod is 28" long, 1/2" wide with end connects as shown on the photos. I'm not sure if the lettering stamped on the broken sash is helpful. What replacement parts do I need to secure to replace both sides?

Window need new balance.

Need a positive part number to order balances.metal section is 28" long. Photos of upper and lower plastic parts.

Stamped on the side of my 2 channel window balances (see photo) is the number "2740", along with "BSI" and "BJ". The length of the long metal u-shaped channel is 28 inches. Also attached are photos of the 2 plastic end pieces. The grids on the underlying graph paper are 1/4 inch . The pulley tha ... (cont.)

I have removed the channel balances and one is broken. they are 1/2" x 29" long. number on bottom is 27-6. Sticker on window frame says Series 710 SH; H-R40-48x84Dimensions are 9/16 x 29"

Hi Folks, Wanted to confirm before ordering... Current channel balance has 2790 30 stamped on it. From the email discussions on your site, this is an obsolete numbering scheme. Please note pictures attached. - my sash is 27 lbs (used bath scale) - current channel balance is 28" (just the metal l ... (cont.)

They are 28" long, 1/2" wide

28" Steel Channel 9/16" wide x 5/8" depthI need to 2 window channel balances with the guides as shown in the pictures.Can you describe the details needed to get the right ones.Thanks,Mike

Could we get a price and these items, please?

need 12 for 2730 and 6 for 2740. Both measure 28" without top & bottom pieces. Also need 18 Top & bottom sash guides in bronze.

Hello, Need help identifying correct replacement for non tilt window channel balance. These were removed from a BFS window. Please let me know if you need more info. Thank you. Regards, Aric

The metal Chanel is 1/2", actually 9/16" but I'm told its considered 1/2". It is 28" long and is stamped 2730