Viewing all customer Discussions for:

26-241 Pivot Bar, 3"

In the first and second picture, I need a coil balance shoe that that is 1-1/2" tall, 1-1/4" wide, 1/2" thick. I couldn't find any stamped numbers. In the Third picture, I need the 3" T Bar Pivot with the exact hole placements. From the bottom to the center of the hole closest to the T-end is 1-5 ... (cont.)

Your Pivot Bar, 3" Product Code: 26-241 HAS THE CORRECT DIMENSIONS that I need. But I need a T-nose end not rounded end. I have ballast Pt530CSB. Do you have the pivot bar for that one similar. Or can I replace the ballast and the pivot bar with a a different one.

I am looking for the aluminum pivot for a double hung Certainteed window. I am not sure exactly when the window was made but the house it is in was built 11 years ago. The part measures 2.5 x 1 inch not including the extended pivot which is slightly more than 3/4 inch. It is basically a right ... (cont.)

I need Pivot Bars,shoes with the coil included. photos attached.

Hello I have some windows that the balances fell down. the ropes broke. when they fell down they broke some of the parts so I need all the parts for the plain channel balance. I need 4 of them for 2 windows. l looked at your pictures and my balances looks like your series 795. inside the balanc ... (cont.)

I have looked at your pivot bar selection and can't seem to identify this one. Its three inches long Any help would be greatly appreciated Thanks Ray

Trying to locate a 3" pivot bar to match this picture. Mine is "T" shaped on the end. I cannot tell from the picture if 26-241 has the little tab on both sides. It looks like it only has it on one side(which would be "L" shaped. Do you have one like mine? I bought the house from someone else. ... (cont.)

I have two identically sized windows side by side. I replaced the pivot shoes for the first window using the 15-179 pivot shoe. Pivot shoe fit fine in the sash and with the original pivot bar and all worked well. The Pivot bar is identical to 26-021 model. Oddly the other window which is iden ... (cont.)

We would be happy to research this for you if you cannot identify the needed hardware on our site. Please post some images in a reply post to this discussion.

How can I take the pivot bar apart from the window?

This appears exactly like the one I broke, but can you provide additional dimensions (thickness and hole placement)? Also, can you confirm the 9/32" width?...mine is closer to 5/16" (measures .306"-.310"). Thanks.