Viewing all customer Discussions for:

26-241 Pivot Bar, 3"

Picture of part and picture of manufactures sticker.

Broken tilt pin. Photographed the intact one. No markings found. 5/16" by 3/16" by 3".

No Markings, see pic for dimensions

The first two pictures are from the broken side. The last picture is the broken piece. The 3rd and 4th picture are the side that is not broken. The piece that broke is made out of pot metal(?) and broke at the first screw point.

I believe these are old MI or Alcoa windows 3050 call size, sash weighs approximate 35 lbs

looking to find a missing pivot pin - pivot pin measures 2.25" and window sash has 2140A

I'm looking for replacement part for window coil springs the upper spring says Omega 6.5 33 in the bottom spring has the number three stamped on it any help would be appreciated

Hello, Hope you can help me. both pivot bars are broken, and for some reason left and right side are different.

Side metal slider that keep windows open

I'm pretty sure I also need the 15-191 pivot shoe (for a 15 year-old Milgard Tuscany window). I also need the coil spring. The only markings I can find on the spring are #7, 5 35. Do you know what part that might be?

1st picture-shows window label 2nd pic-pivot shoe or lock (not sure the correct terminology) Also need the coil springs that run from center sash side to bottom dash side. Need internal tilt latches R & L

Looking for the correct replacement hardware for the coil balancers on these windows.

need 4 window pin,5 weather strip and 1 widow lock

Had plastic cover that goes over the coil break and I'm looking for what possible part numbers or what type of parts will work for replacements. Thank you

For residential tilting windows by ACAN. Installed in year 2000. I need two of each.

Plastic piece which serves as both window lock and window mechanism is 4 1/16" long it is 1 5/16" width, hard to tell a height it varies one side to the other. The piece that is the pivot point for the window I could only get an exterior pic of it as the window manufacturer crimped the edges like th ... (cont.)

Going through the catalog can't find this exactly

i watched your replacement video and that looks exactly like what my window needs. From what i can tell i need to order the series 140 balance system both right and left side. The channel is 1- 1/4 wide and the window weighs about 11 lbs at best. The spring failed and now i just use the window witho ... (cont.)

left side lower pivot bar for double hung window tiltable

When reinstalling the window sash after replacing a screen frame, the bottom right-hand bracket at the bottom of the window sash broke. See attached photos of the broken part. The bracket is about 3 inches long. I would like a replacement bracket; it slides into the bottom of the sash and is secured ... (cont.)