Viewing all customer Discussions for:

26-241 Pivot Bar, 3"

I'm not too sure about it

You maybe able to see the parts number from the pics I uploaded. 2 Coils came out of left side of sash. 1 coil stamped OMEGA #3, 5, 33 the 2 coil markings were unreadable. The housing for the coil had markings, Patent 4,610,108 on the side and either a 6 or 9 on the backside. Depending if looking at ... (cont.)

Good Afternoon, We have 6 types of guides that we need to replace on windows. They are fold out windows and I have the stamped number and quantities of how many of each that I need. All guides are the same in the home..just different numbers. There are no plastic tips on the ends of any of the guide ... (cont.)

Sash is approximately 31x31. Both balancers on the bottom sash are broken as you can see. So balancer kits are required for the bottom sash.

Tilt-in window looking for pivot bar and pivot shoe

I need to replace faulty mechanism in two windows. I took pictures of the parts and the type of window. window dimensions are width 33" x height 51.75". Can anyone help identify the parts I will need to repalce the entire coil balance mechanism?

need help in determing what would be a replacment part for attached parts

There are unfortunately no markings on the hardware or windows, but they were installed 10 years ago.

I'm renovation a house build around the year 2000. I have two windows that are not working properly; only one side is complete with block and tackle balance rods, sash pivot bars intack, and hooked up to a functional pivot shoe that is attached to the the block and tackle balance rod. I would like ... (cont.)

I need this part for 3 windows. Hope you have the exact part, is a blancer.

Hello,I am looking for this pivot bar but cant find one that looks like it. The one pictured is slotted but I am not sure if that matters. It looks to be a T-Bar and is 2.5" long. I have attached pictures to see if you can idenify it and let me know what will work.Charles

Attached are the pictures of the parts I need for my windows. Please call at your earliest convenience and let me know the part numbers and I will go on your website and create the order. Pennco windows. Not able to take better pictures. Please just recommend part numbers most commonly used. ... (cont.)

4 metal thingy that goes into the balancer

The plastic piece 1 in wide by 1 1/2in to the coil. The coil is approx. 21 inches. The pins in other picture for the window base are approx. 3 inches long. I need 1 dozen of each. Please let me know if you have these parts in stock.

fOR OLD KENCO WINDOWS. bALLANCER, LEFT & RIGHT PIVOT BARS, INTERFACE THAT CONNECTS THE TWO, IT IS THE CAM ASSY THAT LOCKS THE TRACK AFTER TILTING IT AND CONTAINS THE POT METAL INNER RECTANGLE PIECE WITHIN THE CIRCULAR PLASTIC CAM THAT THE WINDOW TRAVELS UP & DOWN

These are on vinyl double-hung windows. Unfortunately, I don't have any additional information.

The coil has the sequence (#6.5 35" P) on it. We are guessing it's a 6.5 lbs Serie 160 Coil Balance and 3/4" coil single support. I need to replace the whole housing and want to be sure I have the right measurements.

Hello, I see that I have simonton windows from ~1995 (guessing) when the house was built. I have a few where it seems the coil on the sides of the windows has broke - making it so the windows won't stay open or are very hard to open and make a lot of noise. Attached are photos of one side that I ... (cont.)

Cams and balances for 31.625 x 61 1/2 : 32 x 62 35.625 x 53.5: 36 x 54

Customer brought in broken pin. States it is for a bottom sash.