Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Unsure what the dimensions are. Also there does not seem to be an easy way to remove the pivot lock show from the tracks. Is the jamb spreader set required?

If we can find these parts I will need 2 left side and 2 right side

Pat# 5,139,291 Also has a 75 on the small release on the back And a Z Or an N ????? On the back center beneath the pat# Thank you so much for your help!!!!!!Mine are all becoming brittle and breaking.

I'm wondering if you have replacement Tilt Latches for OKNA 800 double hung windows. Or something comparable. The top sash and bottom sash tilt locks are different. The bottom sash has a rounded end and is raised while the top sash (bottom image) is more flat and also rounded (as to fit up into th ... (cont.)

Please identify corresponding Swisco part numbers for right and left in Beige/Tan color. My windows are made by Mi Windows and Doors and are Series 4300. My measurements are 2 11/16" Long x 11/16 Wide x 7/16 High. Numbers on the back of the latches are 7383-L and 7383-R. I believe the Mi part numbe ... (cont.)

I have several windows from June 2001 that have a broken catch on the release at the top of the tilt in wi does. See pictures below.My order form says these are Farley 300 series white vinyl replacement windows I have enclosed pictures below.Thank you. LInda

The cover for the steel coil has broken. Also the latch broken. Maybe also need some locking shoes. Pls let me know which parts. Thank you.

I need the end of the counter balance, the tilt latch and not sure where the other pieces came from. Thanks

We have two windows needing the pin things, different size windows. What info do you need from me to figure out correct part? Thanks! Kelly

I need some Tempco Window Tilt lock replacements as in the photos. They're about 11/16" wide, 2 5/8" long, 7/16" thick/tall and they slide into a rounded slot. Numbers on the part is 8B (right) 9E (left), 75, PAT# 5,139,291

It is hard to see but on the 'a' picture on the right it has a '5' in there. I weighed the window and it is about 19#. There are two coils on each side so it looks like each side takes like 10#. The coils are .5 inches wide and 1 inch diameter. The whole thing when not broken to pieces is about ... (cont.)

I have a broken tilt latch. It's 2 and 5/8 inches long and 11/16 inches wide. It slides into the window frame and is cream/white in color. Do you carry this size item. Thanks.

Need help getting two pairs of window tilt latch Cost and shipments cost to zip 75211

Hello, trying to figure out what part these are so i can order replacements. Thanks!

I recently purchased a house that contains your windows. The one spring is broken, but I want to ensure I purchase the correct parts. I have included a picture of the broken spring, along with a picture of the broken latch. I have also included a picture that shows exactly which window it is. Thanks ... (cont.)

We need two sets of window tilt latches for our windows. We think the window model number is OXDHLOCKSASM. I have attached some pictures of the part. We are having trouble finding the right part.

The windows were purchased in 2004 from JeldWen I need 6 of these latches that allow the window to be tilted in and removed from the casing.

I need 4 latches 2 left, 2 left. I'm not sure who is the manufacturer. The latch slid out. Please help me identify. The window is double hung and when unlatched comes into room for cleaning.

I need four of these coils. They have 7s on them.

Casey; I have Alliance tilt latch windows. I need to replace the latch that is like your 26-393B however in your drawing where you show a 2-3/8" length, mine are 2-5/8". All other dimensions seem to match. The bottom looks different but has a part #8F and 195 stamped on it along with the patent numb ... (cont.)