Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

markings are 29 6 FX CMC 7 and appears to be 1/2 inch wide and 30 inches long. the 4 photos are enclosed. note, the other window also needs these balances and it appears the only difference is the markings which are: 29 6 HX CMC 11

Attached are pictures of balance needed. The balance is 9/16" x 25" long (metal part only) One pair is all my customer needs. Are they available? #2430 is stamped on balance

I am looking at the S351-22 and the S390-22 Channel balances. My balances have a similar shoe to the 15-001 except the 1 1/8 dimension on my part is 1 1/16. Does the actual part meet the 1 1/8 dimension or is it slightly under and closer to the 1 1/16 I am looking for? If not I will order the S35 ... (cont.)

The length is 30 inches and the width is 1/2. There are a couple of footings in your catalog that are similar to mine. Series 351 and series 390. Please let me know which one I need to order. Thanks.

metal part is 24 inches long. In window 30x30

I need to find a replacement channel balance; the spring broke when we were raising the window. We were able to remove the balance.

I need to order a 3540 balance spring with the ends shown in photos. Please advise on what replacement part number I need. Thank you.

I need replacement parts for the broken window channel (picture 1) length: 27 inches, width 1/2 inch the only marking on the part is 2630 (picture 2) the window is a single hung type Please help me and if you have any questions, please contact me. thank you

Just want to be sure that I have the right top/bottom pieces on my 33" long 1/2" channel balance. Looking at your website, I'm guessing that the top is a 19-002, and the bottom shoe is a 15-002. Since it's a 34 pound window, I'll spec it as a 3260. Please confirm. Thanks.

I need to replace several channel balances whose springs have broken. They are for non-tilt aluminum windows that are old (from the 60's at least). They are the 1/2" wide type (actually a bit over 9/16") and the metal piece of the part is 22" long. There is a stamp on the part that says "21 B", a ... (cont.)

I have 4 different lengths and 4 different stamped balance rods. I am sending this set of pictures of a single rod with the purpose of identifying the top and bottom correctly. The rod in the picture is a 16 inch, non-tilt. Here is what I need for an order: 16" stamp 15B b.s.i. quantity of ... (cont.)

Would you please tell me if you have these balance parts for a old Kinko window? In closed are pictures of the end fittings and the ensemble part I need. The channel is 25 inches long 1/2 inch wide. The stamping on the channel is 2430 AD B.S.I. It appears to me that the end fittings are 19-002 1 ... (cont.)

Attached pdf file indicates the attachments, 27 in length, window weight of 17.6 lbs, and manufacturer markings. Per your website, I think I need to order the series 390, 27 in length, 19-002 top, 15-001 bottom, and weight range for 2630. Can you verify this before ordering this window balance? T ... (cont.)

I got an error using your website so trying this route. I have 4 windows with these balances and all of them are jamming. The balances wont retract even when I remove them from the windows. I've tried lubricant but it looks like the pullies are broken or split. I'm assuming I need to replace all ... (cont.)

I need some help identifying my channel window balance. It looks like either Series 351 or Series 390, but I'm not sure.

The length is 2 feet not considering the inserts at each end, and the stamp in it is 2330. I would need two of these. Can you help? Rick

I need to replace a channel balance for a non-tilt window. I think I need either a series 350 or series 385, but I don't know the difference between 19-002 top piece and 19-005 top piece. The balance I need need to replace is marked 26 4 JR -- it is 1/2" wide and 27" long A couple ... (cont.)

The attached photos are for a 1/2" channel balance that is 38" long. I have included pictures of the top and bottom ends, as well as the serial number on the channel itself. In case you are not able to read it, the serial number is 37DS48L and it also says B61 VD in small letters below it. The ... (cont.)

Hello, We are looking for replacements for our sash balances. they are 27" total length with ends attached they have markings on them. one says 2530 the other says 2540. can you let me know which part number to order for the complete set of balances. Thank you

I need (2) two window balances for an Alenco sash part #2740 N