Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

Need to replace this window balance. I've check this website and couldn't find a match. Some description: 1/2 inch wide, 28 inch long, see picture for the top (maybe 19-005) and the shoe (maybe 15-002). Please advice. Thanks.

Dear sir: I am replacing the broken channel balance of the series 710 window H-R30-48x83 window. The length of the channel (steel part only) is measured 28". The width is measured 9/16", but I understand this means a 1/2" channel width. It is stamped with the following letters & numbers: 27 4 FW ... (cont.)

28" in length from tip to tip 1/2" width Markings: 26 4 FT CMC 4

I have a 2830 with what I think is a 15-001 shoe. (1 inch x 1 and 1/8 inch) Not so sure about the top piece number. What series balance do I need? Many thanks, Kevin

Looking for a replacement part or the entire window balance for an Alenco white aluminum sash (bottom part moves up and down, no tilting feature) window. I'll attach some pictures of the plastic end pieces and provide some measurements. The metal channel is 28" long. The stamp on the channel says ... (cont.)

I have two non-tilt window channel balances I need to replace. I do not know the brand, but the numbers on them are 27-3 and 27-5. In reviewing the parts on your website, I believe the tops match part 19-005 and the shoes are 15-001, but I don't see that you offer channel balances with those confi ... (cont.)

Hello, I'm trying to find replacement balances for my non-tilt BFS window. The balances measure 28", 1/2" wide and looks to have a 19-005 paired with a 15-002. There is a "2740," "BSI," and "rc" stamps on the back of the channel. I don't see this combo offered on your site - is this custom? A ... (cont.)

The spring balance is 17" long on the metal part. It is 0.55" wide and 0.62" deep. The part number stamped on the front side is 1620Z Do you have matching replacement parts I can buy? Thanks, Guy

Hi, I have Jordan Windows and need a new set of channel balances and top sash guides. I'm thinking that I need replacement part numbers "S390-29 w/ option 2830" and "18-166". Would you please let me know if you agree with my selections based on the attached images. Thanks, Jared... ... (cont.)

Tape measure reads 28 inches. I've looked through your parts and seem to get close but not an exact match with top and bottom combined. Can you help please?

Hi, I am needing 4 channel balances with the following measurements

# on balance is 2730 and a backwards/upside down letter K. Also perpendicular to the 2730 # is the # B.S.I(letter I)as best as I can make out. Thanks in advance for your help.

Stamped: 14 2 HW CMC 7 Metal part measures 15 inches

i need the window balancers for pgt window about 10 yrs. old. thenumbers ob balancer are 17 9 26# j0 caldwell, the matal piece measures 18 inchs long about 1/2 inch wide and about 9/16 deep the top plastic has 1/8 inch ear on both sides. thank you tony b.

Looking to purchase two channel balance. The stamp numbers 34 4 IU CMC 2. The lenght is 35 inches. The two photos show the end pieces of the channel balance unsure which model to order. Would also like to order two clips. Please me email me the correct part numbers for the channel balance and clips. ... (cont.)

I need to replace many blances for windows, era 1990. Metal channel is 21 inches long x 9/16 inches wide. Approximately 6 windows need parts.

I need a replacement balance for an Atrium Window Company brand window. The balance is a 1/2" non-tilt that is 17" long. The codes on the back of the balance read: 16 4 IV CMC 7. After looking around the site, I think I need the S380-17 stamp option 1640. However, based on the measurements and pi ... (cont.)

I need to replace the channel balances on a sliding (non-tilt) window but I have some questions: First, It is a very old building and I'm not sure the ones that were previously installed were correct in the first place (exactly correct model, length, etc). Is there a way to determine the exact co ... (cont.)

I have attached a photo of my broken window glide. Can you help Id the parts I need to repair the window. The window would not close evenly there was a large gap on one side. Now that the one glide is out it closes tightly. I have not been bale to extracted the other glide yet, but it is broken a ... (cont.)

I need 4 replacement channel balances for windows at my house. The body is 30" long and has 29 4 IP CALDWELL written on the front. The windows these come from no longer stay up. In one case one of the balances still hooks up to the frame from the string hook, but it doesn't seem to have any effect ... (cont.)