Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

The unit was built in '74. It is located in Delray Beach, FL. The aluminum bedroom window is 46"L x 43"W. The number stamped is 1720 and is 18" L x 1/2 "W. I would like to purchase right & Left with the top ivory catch and bottom shoe already attached. I need two handles, and the right and left s ... (cont.)

Which channel balance do I need?

Good day, I have included a picture for each sides. It is possible the end pieces have been broken off. The inner spring hook end has broken off. The metal portion measures 33" (metal to metal). I have a 32C stamped on the metal body. Thanks for your help, Yves

Need help identifying which channel balance replacement setup I need. I've attached a few pics of one I removed that has a broken hook. The hook appears to attach to the channel with a rivet, so I assume I need to replace the entire assembly, correct? Length = 28" Width = 1/2" Sash Weight = 1 ... (cont.)

I need a price for a complete channel balance for my window. I have attached four (4) photos of the one that needs to be replaced. The metal part measures 30 inches end to end (not including the plastic part). In case the stamp is not clear in the picture, the number stamped on the metal part is ... (cont.)

I need two balances for a non-tilt window. The balance looks like the 351 series but doesn't come in 11". The top shoe looks like a 19-002 and the bottom is a 15-002, It has 1020 stamped on the shaft. Can this be custom ordered and what is the cost? I have attached three pictures Thanks ... (cont.)

I need a total of 6 of the window balancer. It is stamped on the metal "2330". The width appears to be 9/16". Length is 24"

Kinco windows originally installed in 2002. Channel Balance is 30" long. There is a stamp 29 4 and then it looks like B1. Can you help me figure out which one I need. Also, any help on what top sash guide? They were plastic and broke. Thanks for your help.

Hello! My Atrium single hung window no longer stay up, it slams back down. I wanted to know if you sold these channel balances please. Here is what is written on them: 66 26-3 cb5 cmc-1208

I have two 2640 Sash balances that are needing replacement. My top part looks like the 19-005 while the bottom looks like a 15-002. What series unit would i use to replace the balances. Thanks Chris

H-719 is stamped in the black channel guide. I found it under product code # 18-177 Channel balance guide or window sash carrier it is called. It is broken and cracked in several places 28 3 FX CMC 4 29 inch pulley system 1/2 " channel Basically I would like to order the parts for one win ... (cont.)

I have Jordan windows. I need to replace several balancers and sash cams. balancers have 2430 stamped on them. no numbers for the sash cams. I have attached picture of the cams any help would be appreciated Thanks Bill

I'm trying to determine the correct sash replacement piece to order. Can you help? I The channel is 1/2 inch x 28 inch long. It has a marking of p A2730 on the piece. I also have another channel that is the same configuration but has a heavier dual spring ( small spring is inside a larger on ... (cont.)

The overall length 30" X 1/2" width on the balancers, the markings are 2840 followed by a backwards D,and "B.S.I". the plastic guide parts are all missing, I have no examples of what is needed to get these windows working. Any help would be appreciated... The home was built in the late 80s and is ... (cont.)

Dear Sir or Madam: The numbers stamped lengthwise on the slides are, from shortest to longest, 1520, 2020, and 22B. Each slide has "B.S.I." stamped across its width, in tiny letters, to the right of the number. The spring broke in each of these. The windows from which they came were old when I ... (cont.)

Can you help identify this, Please?

Hi there, I just bought a home build in 1981. It has two broken windows, pretty sure it one of the spring balancers on each one. I have removed the window and I cannot locate any identification of the manufacturer. The casing on the balancer says only "20S27." can you help me. with the dimension ... (cont.)

1992 Jordon windows. Two sizes: one 23" channel, one 29" channel. Please see attached photos. Ends are the same for both. The 23" channel is part of a 48"w x 48"h window. The 29" channel is part of a 36"w x 60"h window. Each sliding window is about one-half the window height. Your recommendation ... (cont.)

I need help deciding whether my existing window channel balance is a series 351 or series 390. The channel balance is 22 inches long and 0.5 inch wide. The problem is the bottom shoe. It measures 1 1/16 inch and its shape does not seem to match either 15-001 or 15-002 shoe. I included picture o ... (cont.)

You have a very easy to use web site, but I just can't figure out which channel balances to order. I need 34"L, 1/2"W full assemblies that have the ends to match the photos I've attached.