Viewing all customer Discussions for:

26-272 3" Pivot Bar, Weathercraft

Hello. I need spiral balances that have an end like the one shown in the picture. The parts that I need are for non tilt, 5/8" diameter. The lengths that I need are 16" blue tip, 22" black tip, 28" blue tip and 28" black tip. They attach to pivot lock shoe, part number 15-210. Also does part number ... (cont.)

This strange shape pivot bar is not available from the manufacture. The shape of the end of the bar that goes in the shoe (shown above) must have the correct width so it turns in the shoe and be flat so it drops into the shoe. This is for a vinyl window and you see in photo the wood screws that se ... (cont.)

Need about 12 of these.

This looks similar to part 26-272 but not quite the right spacing on the far hole. Do you have a part that might replace this? Thank you! Dave

Pivot is 3" long, 1/4" wide, 3/32" in height, head is 1/2" by 1/2". Attached are all the markings I could find on the window. There are no markings on the pivot.Sorry it's almost 3/16" in height.

As per my measurement, it's a 3" pivot

Hello... Excellent website! Photo of T-head Pivot Bar attached showing dimensions. Looked at all the T-head pivot bars you display and do not see an exact match. I'm a Professional Construction Project Leader and I think the Pivot Bar manufacturing industry should make pivot bars out of a metal t ... (cont.)

Dear friends, I am trying to replace all the sash parts pertaining to a 53" wide x 50 5/8 tall PGT vinyl window i have installed in my office (drywall inside, stucco on block outside). All the parts associated with tilting the window and the balances are shot. The only parts I DONT need are the l ... (cont.)

Need pivit lock for this widow no markins

Broken part

The photo attached is the bracket fixed in the bottom of the window and attaches to the sliding shoe in the window frame. It is 2-1/2" long X 5/16" X 3/16"

Need parts for new construction vinyl window. Purchase around 2001.

Do you have a replacement for this shoe?

Can you tell me what I need to order? Simonton windows. Nearly 50 percent of the windows in this house are broken, from a foreclosure. It's a spiral balance afaik, but I have no idea what parts I need.

WE HAVE TWO BALANCES THAT HAVE UNUSUAL GUIDES. I HAVE INCLUDED A PICTURE WITH THE VARIOUS PARTS. THE WHITE GUIDES ARE BROKEN. LET US KNOW IF YOU CARRY THESE PARTS. THANKS

Hi I am trying to identify this broken pivot bar. Can you help me?

These are 2 1/2 inch, four hole pivot bars from an unknown window manufacturer. Only label on the windows was B12142 Peluso, 43 x 59 sticker. They are 5/16 inch wide, 3/16 inch thick and have a prominent 9/16 wide tape or head. For the three holes they are 3/16 of an inch on center and there's 5/8 ... (cont.)

Hello, The attached pictures are in reference to a Milgard double hung window. This is the bottom window, but it looks as if the hardware is the same for the top window. These windows were custom made about ten years ago. The parts I need are: 1) The window shoes 2) The balance track 3) The wind ... (cont.)

Good Evening, I very much hope you will be able to help me locate a replacement tilt latch for my Corning window manufactured in 1999, as I do not see anything similar to it among your online inventory

MESSAGE: I have made a purchase in the past for the pivot shoe and guessed incorrectly. Please help me identity the correct one and make a successful purchase. It is about 1/2 inch in thickness. I also am trying to identify the correct pivot bar. I hope that is the correct name for the b ... (cont.)