Viewing all customer Discussions for:

82-107 Sliding Door Latch Lever Kit

Hi. I need an interior escutcheon with the thumb latch in the lower circle. I was able to flip the lock on the outside one to fit my door but the inside one won't fit. Is there anyway to fix this

The indoor manual lock / unlock lever broke. Need to replace just it if fairly easy, or the whole hardware if needed.

The thumb lever broke off and I only see a white powder replacement lever. Is there a beige replacement? Would I have to replace any other parts with how this broke off? Thanks in advance!

previous owner had door lock cobbled together, the mortise lock is incorrect, doesnt fit the opening, and the latch switch broke . I'm looking for the correct mortise set, switch, and possibly weather stripping for the edge of the door. Thanks.

Looking for a replacement handle / lock mechanism for my simonton slider. Attached are the pictures of the handle and the model sticker

I need to replace the roller wheels at the rear of the door and the lock mechanism.

The locking tab broke off of my sliding door handle and I need to get a replacement. I don't know what brand the door or handle is but it looks very similar to the Legacy Lock Set Swisco sells. My door and lock is beige. Can you help confirm if that is the part I need and do you sell just the lockin ... (cont.)

Not sure who the door manufacturer is but the little part going in the door broke.

Hi. I'm looking for replacement for the latch mechanism for a Jeld Wen sliding door handle. Photo attached. If you can point me to correct part please. Amanda

Dear Sir or Madam: The Inside Thumb Lock broke on my Slider. I have included pictures of the lock and the Model # of the Slider. Could you please let me know what to order to replace the broken lock? Also, could you let me know what part is needed to replace the external keyed lock? We would li ... (cont.)

I'm looking to see if you have a replacement thumb turn or the whole handle assembly for this jeld wen French door I do not know any part number or model of door as you can see the sticker is gone

Here are the 3 pictures

Hi, The lock on my Luminess 700 (Owens Corning) slider recently broke. I'm looking for a new lock assembly or handle/lock assembly. A picture is attached. Unfortunately, the handle screws are stripped, so I can't remove the existing handle with damaging the screws. But hopefully the attached pi ... (cont.)

Is it possible to get the lever for this handle?

I believe what I need is your 82-107 but just wanted to verify. The thumblatch broke probably due to the misalignment of the receiving catch in the door jamb

It is the part that is used on the b inside of a sliding glass door to shut the door. I recently received an email that past #82-107 is available for order but I'm not sure if it matters that the one piece that broke is longer than the picture of the part that recently became available. We have a d ... (cont.)

Door lock is sticking. When you move the lock to from "lock" to "unlock" it often won't completely release and requires a lot of repeated and rough attempts to complete the process. This is true both when in contact with door frame and when ajar.

I am needing the replacement lock handle for a Pella 250 series. The windows are also Pella and I need the handle to open windows. Do you have them?

My lock latch broke. What parts need to be replaced?

Sash 2260 latch lever w/ spindle" I am looking for a replacment lever for my sliding door handle in the same finish. Thank you. Carla