Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

I need balances for 8 windows, they measure 34 inches (just the metal) and have the attachment as noted in the photo. The windows are large, single hung, no tilt, shashes measure 44" wide, 36" tall, double glass. I think they weigh about 35-30 pounds. The Balance has a stamp of "33 DS 38" on it. ... (cont.)

I have Nu Air windows that need new balancers. The sash guide is aluminum and the top end of the balancer is attached to the sash with a small screw. The only markings on the balancer is 2920. Is this available or is there a substitute.

Hello, I am need of replacement channel balances. My question is about the bottom shoe. The measurements of my bottom shoe match 15-004 of the 385 series, but the side profile is different. How important is that? I hope you are able to see what I mean from the pics. Thank you, Jon. ... (cont.)

I believe I have found in your inventory, a replacement for the channel balance for my Alenco 3710 series window (series 385, 28",with the 15-004 shoe and 19-005 top), however the existing channel is stamped 2790, and the options listed go to 2770. Not sure if the sash weighs more than 39 lb, and i ... (cont.)

Hello, I wrote to the discussion about determining what parts I need, but I've come close to figuring it out on my own. I just can't tell the difference on your website between a couple of the parts. They are shoes for the bottom of a single hung window spring, 15-004 and 15-005. I can't tell them a ... (cont.)

I purchased the 15-004 Channel Balance Shoe, Winged, but there is a lip on the part I received that my old part does not have. I tried modifying two of them, which kind of works, but it feels a little weak. I've measured the existing one and attached pictures of the new one next the old one. Can y ... (cont.)

What is difference between 15-004 and 15-005 shoe? They look the same to me. I will need either the 385 series or 380 series channel balance. My part is stamped 2940. 30" long. Thanks!

Parts department, Please see attached photo's. Can you provide this type of Balance Shoe for our windows. We originally ordered the wrong type of shoe. Thank you, Kevin

I am trying to locate a set of side sash mechanisms for a Vantage 1 single-hung bottom slider window. On the window unit sill tag is 287-N-024. These side mechanisms are actual metal channel length of 13.62" and have the numbers 13 3 and BSI and a small op stamped into the channels. They are th ... (cont.)

Is this channel balance shoe 15-004 or 15-005?

Greetings. I need some clarification on which channel balance to order. I have a 1/2 wide model. 26" Length Per your website top guide is 19-005, bottom is 15-004. All Very Clear. The issue is specifying the weight range. My Window is 30.9 lbs. which is above the 28 lb weight range list ... (cont.)

Will call morning of 7/31/15 to purchase 14 of these.

I was following steps in picking up the balances to replace. But I got stock in step3 where I can not tell the difference of shoes of 15-005 and 15-004. Any one can provide your advice. --Sean

I have a broken non-tilt vinyl window counterbalance. The cord broke. markings are: 20 4 HN CALDWELL 1/2 (9/16) inch wide. 21 inches long on metal base, not including plastic end pieces. Pictures attached. I would appreciate it if you could ID a proper replacement. T

Hello, I have 20lb Milgard non-tilt-out windows. I believe I have identified that I need S385 with the 19-005 top and 15-004 shoe. The metal section measures 32-3/4 in length, so I'm not sure whether to order the 32" or 33" length. If I use the 33" length then I need option 3230. If I order the 32" ... (cont.)

What is the difference between Series 380 and Series 385 specifically 15-005 and 15-004.

Hello, Thank you for your help. I have a sliding window that cannot be open or bestir say cannot keep open. I am attaching pictures of the broken part (first 2 pictures) that my handyman believes is the problem: top sash guide. measurement: 11/2 inch long and 1/2 inch wide. Attached are also pi ... (cont.)

I would like to make sure I order the right sash balance. On the pictures, you can see the number stamped on. It measures 24 inches. The yellow end measures: 1"2/32 and 15/16" and the white end measures: 1" X 1" X 15/16". I add to my cart: 8 - Product Code S377-24. Would you please tell me ... (cont.)

I need a pair of replacement channel balances for a NuAir single hung, non-tilting hurricane window. The sash weighs about 52lbs. The current channel balances are stamped: 34-16 JB5 CMC (34HP49-51). The metal portion is 35" long with a double spring inside. Can you please tell me where I can g ... (cont.)

Hi, I was wondering if you could direct me to the proper replacement part for my sliding window. The number on the channel are 32 5 BW CMC 2 the metal channel is 33" the plastic thing on the bottom looks like 15-004 but is 1 1/8" Thank you