Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

the top is a 19-005 but the shoe measurements are different than the 15-004 or 15-005

I've attached a picture of 2 spring assemblies for you to send replacements for. I show the part number 29 9 GX CMC 11 . I also have a window with the number 29 9 LW CMC 7. They look alike ... Can you tell me if they are alike. If so I would like to order [6] If not, I need the following: ... (cont.)

Here are pictures of the ends of my Channel balances. The first two are the bottom and the next two are the top. I cannn

Good Evening, I am attempting to replace the channel balances on my windows. The manufacturer went out of business, but the home builder referred us to you. I have searched your website and found the most likely candidate for my windows would be the 1/2" channel balance series 385, 34" long, opt ... (cont.)

I need to order a pair of window channel balances and need help with the part number. I'm including pictures of both ends, length. Width is 1/2".

Hi We have a non-titling double pane window. Thread of one of the support side channel broke and we need to replace the supporting channel. The channel itself doesn't have any brand name or dimensions. I have attached few snapshots and hopefully you will be able to help me. Thanks ... (cont.)

The channel is 11 15/16 inches long 1/2 wide and 5/8 deep. The number printed on it is 1110.

see pictures. Metal portion is 14 inches long and 'hemmed' as one site called it. It is one half inch wide, but the plastic pieces on either end have 'wings' or 'flanges' that make the total insert 1 inch wide.

I need assistance identifying the weight and model # for replacement channel balances.

I'm trying to order window balances for Traco windows. I work at a university and we need these for our student housing windows. I've checked other vendors and they don't carry this item. I've been told it's a window balance made by Dakota Balance, but I know the windows were made by Traco. From ... (cont.)

I need to order replacement channel balances for NuAir windows. The number on the balance is: 29 5 GW CMC 7 The large plastic clip is greater than 1 inch wide (1 and 1/16 inches) The length is 30 inches. I also need 2 take out clips. And, I need the plastic guides. Please let me know if ... (cont.)

Hi, I'm trying to determine which balance spring to buy. See attached photo's that have come from Milgard windows. The balance spring itself is 33 inches without the plastic ends. Thanks for your help.

need replacement..

Channel Balance needed for a 27" x 1/2" part. Code on it shows 26 4 GU CMC 5. Thank you.

Could you please help me identify the correct parts based on the stamp on the balance. The stamp is 29 4 BS.L MH I'm not sure why this has 29 on it because when I measured it the measurements were 30' x 1/2 x 5/8 so I'm torn between 29 inch or 30 inch. I need the numbers for all the parts in m ... (cont.)

Thanks to your videos, I was successful removing the channel balances that have worn out over the past 19 years. They measure 35" but the stamp on the channel is 3440. my question is do you have these in stock as I understand Nu Air Window Company is out of business. Also, let me know what other det ... (cont.)

Greetings!! I came across your website via someone else who had a video on window repairs. I am looking to repair/replace my non-tilt window balance springs on four windows. They are all the same size and I have removed the balance springs and they all match. The spinrgs go in an half inch (1/2 ... (cont.)

My window is not working and I am looking for a balancer. It is made by Milgard Windows and the number is 29 9 DW CMC 10. Thanks.

I have included several pictures of this part. It is a 1/2" wide channel balance. Number set is 26 4 EV CMC 7. The trouble I am having is identifying the particular shoe and top clips. There aren't any particular marking on them that I can tell. Please let me know if you need additional informa ... (cont.)

Hi, I need to order 1 set of 27 inch channel balances with the anchors and feet attached please. I hope the attached photos are adequate. My home was built in 2001. I do not know the window manufacturer. Thank you, Kimberly