Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

I am looking to replace a jk Caldwell channel balance 28-3. It is 29 in long and 1/2 in wide. Appears I need a series 385, but I am not positive. I also don't know what sash weight I have. Recommendations? Thanks, John

1/2" wide, 30" long (metal only), Non-tilt channel balance 29-9 FA2 CMC 9

I have acquired 25 used aluminum windows that I plan to install in an older downtown building remodel. The balance mechanisms all need to be replaced. I don't see a distinction between 104 and 105 shoes. The tops on mine appear to be 19-005. The balance rod is stamped 2340, so I assume that 23" ... (cont.)

Hi there, I have a channel balance to replace that has the numbers: 28 4 CALDWELL FM stamped on it. I don't see any numbers stamped on the plastic ends :(. The length is 29 inches not counting the plastic ends. Thanks!

My channel balance is 28 inches. The ends seem to match, but want to know if 004 and 005 are different. Also, my stamp is 27 C.

My channel balance has the numbers 38 and 2990 stamped on it which I don't see on your list. It is 1/2" x 30". The window measures 50" wide and 30 1/2" tall. What balances should I order?

I need to replace two balances and sash guides in one of my master bedroom windows. The parts are shown in the attached photo. My best guess is that they are 350 series (28" long). Both top pieces (19-002?) have broken tabs where the sash guide engaged. The two sash guides (18-009?) are also cracked ... (cont.)

I need help in identifying these balances. I have 4 windows right now that are really hard to open and need to balances. Attached are some pictures.

I have a channel balance for a non-tilting window with the following markings: 25 5 cx cmc 11 It is a 1/2 inch in width and 25 inches long. I have attached 4 photos which I hope will help you identify it. Thanks. -JK-

Hello, Can you please help me to ID the correct replacement channel balance for my window. Marking on channel balance is 30 3 JN Caldwell Marking on window is MFGR: RYL-017-1 SERIES: VS-5A MST: 4-0 x 6-0 MVT: 48" x 36" channel balance is 31" long Thanks, Cristin

I have identified our channel balances as 351 block and tackle balances with 33" long metal channel, non-tilt window. I do not understand the option selection. I have looked for a stamp or a mark on the window frame and cannot find one to indicate weight. Also, the removal of the channel balance d ... (cont.)

I am looking for a replacement for this Harcar channel ballance. It has a 9/16ths inch wide, by 5/8ths inch deep, by 20 inch tall channel. Attached are pictures of the front, back, top, bottom, and the stamp. The stamp says 2330AA B.S.I What can I replace it with?

Hello, I am hopefully in the right place. I need some replacement balancers for my Traco 240 security/impact windows I bought at Home Depot, Miami. I believe the correct parts are discussed on this discussion page. I've changed these before and the plastic ends look right (see attached pics) ... (cont.)

Good Day, I have 2 windows marked as so... * Single Hung window * Series Mark 40/50 Premium Standard * AAMA/NWWDA 101/I.S. 2-97 * H-LC25/35-52x96 * Mfr. Code Kinco, LTD in Jax, FL ...and am in need of ordering channel balances (1/2" wide & 25" in length) for each. I have boiled it down ... (cont.)

I need a replacement balance for a single-hung non-tilt vinyl window. I have attached images of the balance with the stamp and shoes for your ready reference. The length of the metal is 31" and width of channel is 9/16" Thank you for your kind help. Bis

Our house is 6 years old and the majority of the sash mechanisms have failed. How do I identify replacement units? I have included pics from one set of failed units; the others are all of the same brand, although are different lengths and I suspect different spring strengths. UB 28D ... (cont.)

I have Alenco windows, and the metal tip-to-metal tip is 28" long. "2740" is stamped on one end of one side, and "27C" is stamped on one end of the other side. Attached are pictures of the balances. The first 2 are one end of balance-1. The 3rd is the opposite end of balance-1. The last two are of 1 ... (cont.)

Hi, One of the channel balances on my window broke (the cord snapped) and I am trying to find a replacement. Per your website I'll replace both so I have two new balances. Problem is I can't seem to find the right shoe. From your pictures the top is 19-005 (i think). Can you take a look at th ... (cont.)

I wish to purchase replacement balances and top sash guides for my Alcan non-tilt windows installed late 1980s. See pictures included. I need help identifying proper replacement parts. Alcan numbers on existing balances are: 1710W, 1710E, 2910W 30", and 2930W (all 1/2"). I'm guessing Product C ... (cont.)

I need a 26 inch channel balance replacement. It looks like the 380 or 385 series. I don't know which option I need. On the channel balance is printed "25-9 IX CMC 11." Not sure what this means. Thanks Burke