Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

I know I have the right balancer length and width (21" long and 9/16 wide), one set is stamped 2020 and the other 2040 (2 types of windows). Can't quite tell if I have the right top and shoe, I think its 19-005 and 15-005. Can you tel from these photos? Was goint to order your S380-21 thanks! ... (cont.)

Length 26 inches Width 9/16 inches

Channel balances. Measure 29" Marking: 28 4 EN Caldwell I think this is 15-005 Shoe. But could be 15-004 Shoe. I can not see what the difference is in these two. How quickly would these ship out if I were to order them today? Need quantity of 4.

Metal part is 27.00 inches long; Markings on part are "26 3 CALDWELL HM" Part looks like Series 385 Channel Balance, but I am not 100% sure. Hope you can identify it by the markings provided -- else I can send you a pix.

Can you please help me identify this balance? The balance length is 30" long and the marking states 29-6 AA CMC 11

I need two channel balances and need some assistance on which to order. Based on your site, it looks like I need either Series 350 or 351. I have attached photos of both ends, so any assistance you can provide is appreciated.

Trying to identify this channel balance for replace/repair work. Channel identifier: 26 6 GW CMC 11 Total length is 27" Unsure how to figure out the spring weight/strength....weigh the window?

I'm looking for block & tackle replacement, the whole piece. The markings found on the existing part is : 23 5 Caldwell BM . The second piece marked: 23 4 Caldwell CM . Both have the same length: 24 inches long . I need two pieces total. Please quote me the price, too. Thanks. kc94030 ... (cont.)

the ones i have are 18-166 and 16-002. i also have the rivets and the rivet tool. the piece i need now goes on the bottom of the window on the metal piece.

I need to order replacement balances for three Kinco non-tilt windows. Attached are the pictures of the three different balances along with pictures of the tops and bottoms. Here are the markings of the balances: 24 9 JW CMC 11 28 4 KW CMC 11 29 6 KW CMC 11 Would you please let me know whi ... (cont.)

Good morning, I have Nuair Windows, installed in 2005. Attached are pictures of the top, bottom, code and the length. Please email with parts info. Thanks Cindy

we just ordered a plastic sash guide for our norandex window. It was the guide screwed into the removable window. Got that replaced, but see the pulley on the balance channel is broken too. It is a 1/2" X 35" with a number of 3440BSI on the metal part. We can't find that number in your product li ... (cont.)

The window ballast part is 30 inches in length from each end. There is a marking of "28D" stamped in the metal. This window is a basic type of window that appears to be very similar to the type (based upon the push mechanism) featured in the following Swisco demo video on youtube.com titled "How to ... (cont.)

Failing, broken, and missing channel balances on Philips windows. All windows same size. They weigh 23.2 lbs each. Windows are terrible to operate. All channel balances are marked 25 5 EL Caldwell. Hope that is enough information to determine what we need. The windows are in the home of an eld ... (cont.)

The windows I believe are Aluminum and either were installed around 1987, when house was built or 1999 ( I saw that date on some of the windows), which could be just the window panes changed and not necessarily the whole windows themselves The balancers are of two lengths 18" has a side stamp (17 ... (cont.)

This is a 26" x 1/2" window balance. I need to replace these on 2 windows. The stamp is 25 4 HP Caldwell. Thank you.

I was told the window is a Kinco from the builder. House was build in 03 or 04. The window is 30" tall. It is also 35" wide and 23.5 lbs with a metal frame. Number on the part is 29 4 LV CMC 2. I'm sending you pictures of the channel balance, but I may have to send it to you because I'm havi ... (cont.)

Need to replace a Milgard 33 " 1/2 " channel balance. Code on balance is 32 5 GW CMC 11. What balance of yours will work?

The number stamped on the part is 26 4 BSI PO (also included in an attached image. The channel length is 27 inches, width 9/16 (1/2) and opposite width is 5/8. I am interested in purchasing a replacement channel and one take out clip.

Hello, I have a broken channel balance that has the signage "13 3 DU CMC 2" (pictured). What is the best replacement part for this? The channel length is 14", and width is 9/16". Both end parts have "wings" Thanks! Vega in San Jose