Viewing all customer Discussions for:

84-074B Screen Door Roller, 1" SS BB Concave

There are two on the bottom of the door and two on the top. I need to replace the rusted ones on the bottom

in addition to a roller of this style, there is a plastic riser that sits atop this roller. It has holes for mounting screws to pass through. it is a necessary spacer for the roller to reach the correct position inside the frame. it encloses the adjustment screw at the top of this roller and protru ... (cont.)

This is the screen door to the 12 foot slider you've been helping me with. I'll be ordering as soon as I get this question answered. I have taken the screen door off for the roller here. Are the photos just need to know what type of roller I would like to replace it with metal rollers not nylon whi ... (cont.)

Purchased the above but unable to find the correct video to install them. One video said it was for this one, but showed a different number part installation. Can you help me? Thank you.

My rollers are similar to the swisco 84-066 except the 1/2" body height

I need four roller-wheels for aluminum storm doors. I have a pic but will have to send it later. Where do I look on the site?

How do I determine what I need (see picture)? ? Thank you. ? Pierre

How is the 84-066 roller height adjusted? The 84-502 Adjusting screws won't work.

Hello. The dimensions of existing wheel assy. are: 1" wheel, 1/4" wide; mount bracket is 5/16" wide, 1/2" tall at tallest point, 2 1/8" mount hole spacing ( 1 1/16" from either side of adjusting screw. Purchased 84-074B and the diameter of the wheel was too small then purchased 81-266 and the whee ... (cont.)

From a Vision 2000 sliding screen circa 2000. I think it is 84-074B. Measurements all match both. 84-074 is very similar except the rivet head are on the wrong side and it specifically says the wheel thickness is 1/4 inch. My part seems a little narrower. So which one?

I called a Swisco.com rep on the phone about the odd size, terribly constructed screen door wheels that I would like to replace. Attached are photos of the wheel and dimensions. The wheels are supporting 11' high by 60" wide screen doors that were manufactured using Schuco extrusions. The base of ... (cont.)

I could not find this wheel on your web site

can you determine from this photo what I need?

I just need to replace de screen door

HI, We have a screen door that is 78 5/8 tall and 36 wide. Do you have something that would work for this. Unfortuanately the name is worn off the tag. Otherwise, do you have the replacement wheels. That is the most important part as it does not run smoothly or quietly. :) Any questions let me kn ... (cont.)

Metal Wheel 1 1/2 inch Length 2 15/32 inches Height about 2 1/4 inches Internal channel 1/4 inch wide Height on narrow side 3/16 inch Height on fat end 1/2 inch No markings that I can see.

It looks like I did find the the item on this website, but wasn't entirely sure if there are different sizes of this model or simple generic one that is utilized for sliding doors that have this particular roller.

I am in need of replacing these rollers and the door gets stuck often from rust. I think this would be a drop in replacement, can you confirm?

Have Loewen Patio door screens with rollers that have identical dimensions as 84-074B. Only dimension not mentioned is roller width. Mine are only 7/32" wide. What is roller width of 84-074B (hopefully not 1/4").

Screen door roller