Viewing all customer Discussions for:

26-150 Cam Pivot Pair

I am sending you pictures of the sash so you could see the type of shoe that it had to fit into the rib balance, and a picture of the rib balance The only stamping was the 24 each day and the red bounce was 3/8 of an inch on the face of the channel

Can you advise if you have replacement parts for double hung loewen windows as shown in the attached photos?

Hello, Can you help me find the parts that I need? Thanks, Nate

Hello - I have a house built in 1981 with a wood framed single(?) hung square sash windows of various sizes. The window balances fit in a channel and are spring operated. The balances in the first set of windows I want to replace are approximately 25 inches long and the only marking on the balance ... (cont.)

the pivot pins are cam style length 1 and 1/4, width is 7/16 and is 3/4 depth

Attached are images from Caradco windows that require parts to repair. Pivet shoes that have the measurements on the images and I believe the primary measurement is the thickness at 3/8" for the broken pivet shoe. I also need cam pivet bars that attach to the bottom sashes of these windows and loo ... (cont.)

Having difficulty locating a replacement pivot pin for tilt in windows (see part in attached photos). I've come across many similar, but not one that looks exactly like this, with the additional flange and screw.

The best way to describe it is a hinge pin for a double hung wood window

I believe the window brand is Weathershield b

1991 +- Andersen double hung tilt corner pivot,

I have included a number of pictures of a sash tilt pin (only Left, need both Left and Right) and weatherstripping in place hoping you can ID or find a substitute. Thanks, Luis

With the window pics can you provide the correct pieces that would work on the frame side. Thanks, Jim

Hi there: I am in need of the one set of pivot points and at 2 Cam Locks. The attached ictures of the parts are from a Weathershield Vision 2000 series window. The pivot pin is also referred to by WS as a 62-840 part. The Cam Lock appears to look like item# 15-233 on your website? Thanks for checki ... (cont.)

I think I saw something similar that would work on your site but it's metal and has no nail? This one is nylon? Thank you for your help.

Hi I am looking for a few of these both left and right. I can't find any in a search. They are from Window Shield sash replacement kits. Window Shield says they still make these. Could you assist? Thanks!

See attached stamp photo for marking. Appears to be a single PVC track, 3-1/2" wide w/ a neoprene sweep on the exterior face that snaps into concealed clips mounted in a rabbet (see photo). I have 7 window balances to replace + weatherstripping, 2 different lengths (4 are ~49" L., 3 are approx. 46" ... (cont.)

please help identify

My jamb liner double hung tilt windows have pretty much two (top and bottom) identical sashes, each of which weights 22.6 lbs. I have balances that have two different stamps, one is 30HD G.S.I. GL and the other DB 30HD. I suppose they are the same and I want to know if S751-31 with 30HD option is ri ... (cont.)

Please advise, Price and availability of attached parts. Need 4 pair. Windows purchased and installed around 1999-2000.

Looking for double hung window pivots. Not sure of brand of window but look like "hurd"