Viewing all customer Discussions for:

26-150 Cam Pivot Pair

One of these small parts is screwed onto each side of the sash widow, and each post fits into the track in the widow frame. The post rises in the track as the sash is raised and lowered, and the sash can be rotated or of the frame on these 2 posts.

Tilt in window 31 inches long metal piece 5/8 wide I can't get tilt out foot out of track. I think thats 1 inch wide Stamped 30 HD on side. I want to order everything for contractor to install.

It on both sides of the lower sash to a Anderson 810 series double hung

Having difficulty locating this part.

Good Folks, I'm looking for at least 2 sets (both right and left) of these pivot pins. I hoping that there is something identical or a replacement that will function properly.

Unable to find any brand or identification information on the windows. Broken Pivots are marked with L or R only.

Do you have Kolbe Kolbe replacement balances? I have a customer with a full house full of these and they are all broken. Please see the attached photos. And which pivot pins go with the 751 series?

I have a window missing the balances. Both left as right side are missing. There is part of if a red knife shoe left in both sides as the prior owner tried to window remove the balances and left the shoe. It's sizes as a 33TG from the adjacent window. Could you give me the part number to order? I ... (cont.)

Hello, I'm looking for a pivot pin/bar replacements pieces for a Semco windo. It seems like this would work on my window, can you confirm by looking at my photos? Please? Thanks, Candace

My house was built in 2003. I believe the windows were built in Nebraska and shipped to the building site in Colorado. The windows appear to be very nice heavy windows, wood with metal cladding. The piece I am looking for is attached to both sides of the window and it goes into a spring to keep the ... (cont.)

looking at your - 33" SERIES 751 CHANNEL BALANCE to replace single hung wood window. my actual length is 33 1/2" with the attached shoe on the end.(photo attached) - I belive that the shoe on mine is your number 15-197 - will also need matching cams-pivot bars as well belive your number is 26-150- ... (cont.)

NEED 4 RIBBED CHANNEL BALANCES,TILT, 2 FOR TOP, 2 FOR BOTTOM, METAL MEASURES 25 INCHES, TOP SASH WEIGHS 7.5 POUNDS, BOTTOM SASH WEIGHS 8 POUNDS, 24FHD STAMPED

I believe this jamb liner tilt profile I am looking for is 86J bracket type V plough.It has 4-28HD balance's which you carry, along with the tilt window cam pivots 26-150 which are metal zinc.Do you carry the plastic? left white and black right? Before I start to rebuild these Jambs I want to make s ... (cont.)

Trying to find the right pivot. It is 1 1/2" long. 7/16" wide. 5/8 total thickness. 1/2" thick pivot.

Holds window in at bottom

Picture of good side and broken side

This is from a double hung vinyl window that I purchased from Weathershield 20+ years ago. I need 8 sets (left hand and right hand) to replace broken parts in pictures attached. Folks at Weathershield referred me here. Your help would be greatly appreciated.Thank you,Paul

need thees

Hello, New home owner. I have 2 double hung windows will not stay open. Windows are I believe made my Loewen from 2004 and are approximately 38.5" W x 65" H measured inside jamb to jamb. Bottom sash is taller than top and its the bottom window that has the issue. Pictures show markings on cha ... (cont.)

Weatherstripping is 'plastic', material is ~ .0205" thick the folded part is ~ .54" wide, the 'hook' part is ~ .25" high and ~ .093" thick (that part fits into groove on window). Looking for a large length of this material to replace all weatherstripping in six windows. Need to replace in both uppe ... (cont.)