Viewing all customer Discussions for:

26-450 Pivot Bar

Can I use the 26-450 Pivot bar with the 15-129 Pivot shoe?

Hi I would really appreciate your help. I am trying to find replacement lock shoes for Monitor (Great Lake) windows for sometime now with no success. I have supplied some pics of the broken lock shoe and the pivot bars. The shoe has steel CAM i believe. Thank you in advance Carolind ... (cont.)

Hey, I have a window in which both right and left pivot bars broke off the bottom window sash. Attached is a photo of a salvage part...(tenant says it's all she could find...result of break in).

I have window world windows installed by a previous homeowner. I have multiple windows with broken pivot bars. They are series 201/A201 Double Hung windows. The two broken bars that I have recovered are marked with an N on one and a P on the other. The screw hole is starts at 1" into the pivot ba ... (cont.)

I need to find this pin

Help me pick the right replacement for this pin

Hi. Need replacement for zinc window pivot bars but not sure which one to order. Thanks.

These are at the bottom of the windows on the right and left side, they screw into the bottom and then go into the guides in the window frame. When they are not present, the windows won't stay up. I need at least 10 of them. As you can see in the second picture, one is the part I need and the oth ... (cont.)

Inch-long and hole is approximately at 1 7/16 in was there a number for stamped on it

I sent a picture of the sticker on the window as well as the pieces of the windows that are broken. Do you know if you have these replacement parts available? I would most likely need around 20 of these replacement parts. Thank you for your help.

Hi, I'm looking for part numbers and prices for:The smaller of the two Pivot Bars shown, Measurements: The overall length is 2 3/16". The distance from the pointed end to the center of the hole is 1 3/16".The Coil Balance Support (anchors the coil to the window frame), measurements are attached (wit ... (cont.)

Has spiral balances. I would also need the adjustment tool and possibly some spiral balances

I need 2ea of this pivot bar. Do you carry any?

Hi I am looking for 4 of these pivot rods. I don't have and product information.. We just bought a house and would love to salvage these windows. They measure 3 1/4 inches and have 2 holes. Help!

It's broken and bent but first I need to identify its replacement. I believe this comes from an Anderson window. Thanks!

I am looking for these replacement pieces. The window model # is H-LC40. Can you help?

I have bought before parts for our windows. Do you recognize this part. It belongs to the same windows I have bought parts before.Looking forward to your helpSincerely Isaac T

Pins appear to be aluminum, there is a circle on one side of the pin near the rounded end with a number 1 inside the circle. I'm not sure age of windows? - 2-3/4" long - top to middle of screw hole- 1-1/8"

pivot bar piece is approximately 1 1/8" to center of hole a # 7 is cast into piece. Appears to be 1/4"wide perhaps slightly less.remainder of piece is in channel at bottom of window I have been unable to remove it but am able to move it further into channel. Penguin was manufacturer, window is 10-12 ... (cont.)

Hi, The Pivot Pin broke.Here is a picture of the other one that didn?t.No name on window The window does have a label which I will take a picture of.Please help I have had my window like this for 8 years.Thank you