Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Truth hardware marked 30744

Looking for the pivot hinge / Pin Lower section on my window. Looks to be rusted out.

Looking for 4-5 of these window cranks made by Truth. Especially need the black plastic (cracked) slide at top and bottom corner of window frames. This house is about 30 years old, and I believe the window cranks are original to the house. Thanks.

The black plastic piece is broken on manybof these older windows. Looking for either replacements or alternative solutions for the windows.

Can you help me please. I need weather striping and other parts. The guide / slide as you will see is completely rusted through. See pictures. Thank you.

See the attached photo of the window operator. The operator itself seems to be working fine. But there is an arm broken off from the base on the edge of the window frame. The rivet is broken off. I did not see any markings on the operator to identify the brand, can you tell or do you sell the arm b ... (cont.)

Casement wood window by Biltbest circa 1969-70. Broken plastic piece in picture attached window to frame at top and bottom corners. No identifying numbers on the piece. We need 3-4 replacement pieces please. Thank you

Drag arm for a casmnt window

Looking for window replacement what appears to be 5"1/2 swing arm and 9"1/2 ish bracket

Hello, what would be the part number for this piece? It's on the side of the casement window that supports the window on the sides. It is heavily corroded and keeps the crank from functioning. These are pella lower casement windows. I previously purchased 39-239C for the actual cranking mechan ... (cont.)

My window sash moves all the way to the side wall of the window when it's fully open. I need a 10-inch and a 14-inch version.

Picture is from oldcastle window I need the black clip that runs in the casement track for the bottom I enclosed picture of the upper one . I need same clip for the lower Thank you

I was lubricating my kitchen window (Loewen?) and the black plastic slide fell apart (see pictures). The bar that the slide is mounted on is about 11" long. I managed to get the window back in the hole and it is secured with the window locks. Are these parts available (I would replace both the le ... (cont.)

My handle will not stay in place and everything is rusted can you please help. HG04 2001 23 3/4 x 37 3/4. Pat # 664 4884 Pat # 644 2899

On the left side , there is a metal piece missing. On the right side with red ink, I circled the metal strip that is needed . Please help me to identify this long thin strip. Thanks, Nancy

Installed part is on bottom of window

I'm seeking the piece that is highlighted in red,

Hi there, I am looking for a Truth hing. The upper arm is 7.5 " -8" in total,

Just ordered replacement handles but that did Not help so I will need 2 closure mechanisms.

Hi, I am having some window Sag and was wondering it there is a replacement adjustable hinge that can replace the current set. The existing hinge is most likely truth/Hurd with 6098P stamped on the hinge. Thank you.