Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

I believe these are from Silverline windows. I need to replace everything with plastic. Including the rail sliders.

Good afternoon, Can you please help me find the accurate hardware for a replacement window sashes job? I have about 45 pieces (sashes) to be replaced and we need the following items: -straight arm operators 11 1/2" -tracks -locks - top sash mechanism Please see the pictures attached and let me know ... (cont.)

Broken slider on upper casement window. Need part number and quickest way to get it Thanks

I know it's Truth hardware, but the numbers are mostly rusted out. It looks like 307X4B or something like that. The "X" is for a number that is completely unclear. The bottom slide rail is 10" wide. The metal piece attached to the bottom of the sash is 8" wide approximately. We need all of that ... (cont.)

The black sliders that connect the arm to the window are broken in several windows. I don't believe it is possible to get that part. If not, can you help identify the correct full arm replacement for this window both right and left side opening. The bracket that the arm slides in is about 11 5/8 inc ... (cont.)

hellow my jeld wen window was opened too far and the black piece that fits flat on the casing that holds the are in place has 3 black holes and the last hole that the little arm has attached in ripped so the small arm will not stay in place thus making it hard to close window. The piece is about ... (cont.)

I am trying to find this replacement. It has an extra part I can't find anywhere else. Little arm with a black plastic part that slides along one shaft - See pic

Can you please take a look at these photos and provide me the list of items I need to repair this window? Provide pricing and instructions for me to order from you. Want to replace everything that connects the window to the frame, both top and bottom. I am not sure of the brand of window... I b ... (cont.)

it get almost close and will not go the last inch if we push it from the out side it will shut but it feels like something its jammed I removed the clips and locking hook and did not improve it so does it need a replacement crank ? here are the pic of the crank and clips

How do I measure the size and brand of operator so I can order new ones? They say "EntryGuard" by Truth.

right side window track and window bracket that attaches to the window that has the track guide ( note the guide is missing from the bracket that's the part that moves / slides in the track) the only markings on the window is G-U. Could be a silverline window? I don't need the window operator. the ... (cont.)

Sliding sleeve that has a pin that fits into window has deteriorated, rusted and broke so that no pin exists to hold the window and thus not able to advance open or close.

Hi! I'm looking for a replacement crank operator for a casement window. Photos attached. I can find no numbers or markers of any kind on the part. On the handle is the name Burton. Burton is also stamped into the wooden window frame. The unit measures 4" across at it's widest point. The arm measures ... (cont.)

When opening this casement window I heard a snap noise and found that the bottom hinge portion of the sash is no longer sliding within what I am guessing is the track (see red boxes on image 1). Looking at the operator I was able to guess that its a Truth 31850 model (image 2) if that matters in thi ... (cont.)

I was working with you on replacing a complete operator set for a casement window.I need all the parts, operator, arms, window brackets channels.I will send another post with a couple more photos.I believe you identified what was the most likely fit, but i lost the information.My Best,Mike ... (cont.)

I tried to open my window a bit further so I popped the arms off. I didn't realize the top one was the only thing holding it up there, so it fell out. I think the only part I need is the one that screws into the window. I think it's not part of the operator.

the Swisco customer guy says you'll probably have the hinge I need. Do you have this?

Hello, Trying to identify this 10-15 year old window mechanism. I have 5 of these windows. I believe they are "Interlock" brand One of the windows is missing the black plastics glide/slide that supports the weight of the window. This part seems to be quite a unique design. I have been unable to fi ... (cont.)

Need replacement hardware for 18 year old Marvin Integrity windows.

Hello, The black plastic slider is the item needed. Thanks, Paul