Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

I need to replace 4 tracks on my casement windows.The window crank is in good condition, but the tracks are rusted.enclosed see photo.2 open right to left and 2 open left to right. Can you help? Andy

Hello! We have PGT Winguard Series 540 casement windows and all 3 cranks mechanics are rusting. Attached are pics from the "best condition" window. Can you help identify not only the correct Arm Operator, but also the arms/tracks on very top and beneath the window casement? (I believe these are d ... (cont.)

My handle broke off it's the older version where it has the male part coming out of the handle the model number that's on the handle is op05-7810 do you have this handle or do I have to get a whole new operator and handle if so what are all the parts I need ?

I recently repaired my window sash and inadvertently lost the upper hinge bar aluminum detention retainer clip. Will you kindly send me an aluminum replacement clip to hold the arm mechanism in place on the pivot pin. Picture enclosed Thank you

US Pat 4241 642 Pat 1982 L 3084 other side 20810 also 30830

I need all parts for the window the crank the handle the upper and lower sash that connect the window to the frame I'm pretty sure thank you for your help +1 crank for a opposite side. Thank you mica.

Do you have a replacement hinge set matching the attached photo? Dimensions are indicated. Thank you, Kathy

I'm looking for a single bar casement window hinge anchored on the window and slides in a track on the window frame. It is about 5 inch long with plastic anchor and slide. The one I need is the one my finger is pointing at. The arm has Del Mar Toronto stamped on it. It's approximately 5 inches long ... (cont.)

Hi, Almost all of our windows do not close correctly due to bottom hinge hardware being rusted and inoperable. I don't even know what parts are needed since they are rusted away. Also looking for replacement seals. And maybe a few crank assemblies, I found some stamped markings on one. I have att ... (cont.)

The picture shows the part I'm needing to replace. The top piece / sliver color has a number on it 40941. It measures 10" long. The other piece that snaps on the river has 2 pieces the only thing on it is Truth. The piece that snaps into the aluminum piece measures 51/4" long. The other piece with t ... (cont.)

I recently purchased a home with Simonton casement windows. On several of the windows the metal piece at the bottom of the window which is used to attach the plastic slider has developed rust. On one it is so bad that the metal piece had corroded to the point where it has broken into pieces so that ... (cont.)

And I have a Silverline casement window 70NCW1?.. has it is installed now, I have 5.189 ft.² of clear open space. I need at least 5.7 ft.². I need to acquire whatever hardware is necessary to make the window open further. Please see the pictures attached.

I am looking to replace the hinges on a casement window. I don't see any markings on the hinge itself or any numbers on the window. The crank cover only says ROTO.It looks like the hinge that is shown in the video that shows replacement of the 2 bar hinge set part #36-048. Attached is a picture of t ... (cont.)

From window label: PGT-1 Series: CA 440/540 CASEMENT P.L. #861-059 Validator: ALI I need 8 window crank assemblies.

hi Im lookin for this milgard window hinge Thank you William

In the picture I found two number the left window has 30746 see pictures the right side has 30841L.I purchased your replacement the numbers 39-035 and 39-036 when i went to install the left one the bracket and stud was not there. So I need the bracket and stud showing in the picture, the plastic cov ... (cont.)

Hello, I need to replace the parts on my casement windows. one is a left hand crank and one is a right hand crank. The model of the window is PGT CA-440/450 Vinyl Please look at the photo 2571, these are the parts on your website I believe I need to order. The only part I cant find is the rusted bar ... (cont.)

Trying to hunt down this part. It's 7.75" long, the part that mounts to the window. The clip that holds it into the track in the corner is worn out.

I'm looking for a casement window hinge for a friend. Does that block of plastic play a role in the hinge operation?

4 Window Bow Window, L & R are casements. Unable to ID the Manufacture, No remaining stickers. Installed approximately 1987.Pictures are from the R/H operable working window. L/H Hinge has broken & missing parts & screws and does not operate or close properly. Due to weather condition ... (cont.)