Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

I am hoping that you can help me for some replacement parts. As you can see in my first photo, I basically need most of parts replaced especially the bracket in photo #2. In photo #3 the bottom bracket is #51512- 6" long. The curved arm is #31538A. This is part of a 3 window set with the middle w ... (cont.)

I'm looking for replacement hinge sets for multiple windows. I need the top and bottom hinges. The picture shows the hinges that I am looking for. I haven't been able to identify a source for hinges of the same length. I'm not sure of the window manufacturer as the windows were installed in the home ... (cont.)

need replacement part as the plastic piece which glides in channel broke

9D504 is stamped on the left opening hinge shown above. 9D903 is stamped on the right opening hinge shown above. I need both right and left opening kits including handles which are stripped out. Please let me know part number and order process.

wish to order for repair

Vetter window operating mechanism, left side of window looking from the outside. Numbers 6603 on part from rail on window sill to under window. # 31850 from crank mechanism to bracket attaching to window. TRUTH symbol on pieces. This particular window is rubbing against bottom sill (lower right ... (cont.)

This is the part that I need, I need to have in stock, for the right side and left side.

Window is probably 40 years old

Hello, The problem appears to be the back plastic position adjuster. I didn't find any number on the truth mechanism, but did take a photo with the tape measure to help with sizing. I hope you can help! Thanks.

The glide on this hinge assemble is bad and need to replace ( Probably the whole arm. They are Anderson casement windows.

I have sent pics of the hinge assembly that hopefully will help you identify which parts that we need. The label pic is a distant view which says, MFR: PHP-62, ALI Validator, Series 850, Casement. We will need the complete assembly. Hinges are on the left side and window opens to the left, obvio ... (cont.)

i have a left hand crank out casement. 22 13/16W x 69 1/2 High. i need the top and bottom hardware kit for the window. the crank out assembly included. Need new channels top and bottom as well. I have the screws to install. Uploaded three pictures of the style. It only says Wright on the extension a ... (cont.)

Hi. Has a stamp on the top of hinge that says Truth which im assuming is Truth Hardware. Help me identify this please.

Hi the part of the window base(black piece) that engages with metal baseplate and retains the window as it opens

A the end (top of the picture) the black plastic part is mising makingb it harder to slide in the rail!

Looking for a replacement

clips: length 28.5 mm width 12.7 mm fits on flat arm 3.2 mm thick

We are needing to replace the hinge operator and crank for the window in the photo. The actual window is the exact same window and operator but the crank is on the left side. We can't open the window since it is broken, so I sent a photo of the identical window with a right side crank. I've looke ... (cont.)

the first picture is from the same window not broken. the second is of the part i believe i need. Thanks in advance, Andrew

They are both 10" slides but the bottom bar is longer and they both have adjustable slides on them as apposed to the 36-048 and 36-090-10. It's just one window top is smaller bar than bottom bar. Please help.There is a number in the bottom hinge that reads (30818) by TruthThank you Bret ... (cont.)