Viewing all customer Discussions for:

39-253LB Encore Dual Arm Operator, Sill Mount

Hi, I'd like to replace all the hardware in two Simonton windows that are 51"x28". Pics shown here and also the cranks. Thank you Jeff

I need to replace this operator. Any idea what part to order?

Hello. I am unable to find replacement for this unit. I have 4 of them with same issue. I am able to open them - but I can't close them within 2 inches of the opening. It just continues to click and would not move. I need to help to shut it. Thanks Boris

Part is stamped Truth, 41011. I located it in the Truth catalog but without the flange rivited to the short arm, and without the glide rivited to the long arm. Can you provide a replacement complete with the added parts?

Replace right hand and left hand operators Part numbers on operator arms 9D501; long arm 51014; short arm 67813

40987 Looking for replacements Thanks!

I could use some help selecting the proper part from your website to replace these window operators.My customer has six windows that all have strip gears on the operators.If you could help me identify which part I need to order I'd like to place an order for them.Thanks! -Joel

Looking for 2 of these.

Looking for an operator for a Milgard right hinged casement window. Inside window is a MFG date 2001 and a possible or partial model # 457265

Do you have this specific part in stock, if so I want to order ASAP. If not, do you have a replacement part? Thanks

The part is approximately 5 1/2 inches

Need a replacement part number 31876

Hello Please tell me what the part number Thank you

While installing a water pump just outside the window, my hand slipped and popped the control arm out of the window slot, losing whatever washer was atop the pin. I have a separate lock washer that fits the pin, but I can't get it to keep from dropping out of the window's slide track. Any ideas of h ... (cont.)

on the under side of the thicker arm is 41012. The thinner arm has 31876 on the housing underneath is: made in the USA and a date of 07/10/01 11:34 Hope this helps

Hello, I have three casement Windows that need new mechanisms. The first pictures show one of two casement windows that are Simonton. I will need right and left with the complex arms seen in the pictures. The third window is unknown manufacturer- made in New Jersey- this one is awning style wi ... (cont.)

need 2 right and one left

41011 is the number on the long crank arm "truth" is the current brand. Thank you

Hello, I'm looking for replacement for my broken operators. I need both left and right operator. I narrowed down to two products that looks similar to mine. 39-438B sill mount low profile vs 39-253LB sill mount. I attached pictures to help you help me identify which one. Both show out of stock ... (cont.)

Good morning, I just want to verify that 39-253LB is correct. Also do I need the replacement black retainer for the end of the long arm? How about new window bracket at end of short arm...mine has a stud with a slip ring. Thank you.