Viewing all customer Discussions for:

39-239B Encore Awning Operator, Sill Mount

I need to replace the operator pictured. It is a Truth operator p/n 121598.

The teeth on the gears on my truth window operator have failed. I can't close the window by crank. Looking to replace the whole unit and reattach it to my existing window. On the bottom of the gear box it reads 050699 03:39. The arms of the operator read 31881, 41010, 41016, and 41013 ... (cont.)

Size is 5 inch part on interior Reach out is about 14 inches

would you please let me know what is the correct part number for the attached photos i have part # 39-536 and 39-239B in my cart.regardsKian

Need help trying to get the whole mechanism for crank out window. Contractor did not install the full assembly. Please see Jeld Wen handle on existing window and window missing entire unit, handle and crank out scissors. Appreciate your help in identifying parts.

In previous emails, Swisco customer service suggested that Part SS39-239C is the correct replacement for my old operators (Milgard vinyl awning windows, installed in 2001 or 2002). My question is: would Truth 39-375 folding handle with cover work with the new operator? Currently the old handles o ... (cont.)

I'm trying to find the replacement for the crank and the arms for my truth window the item number AP-C40-61X37

The long arm is 11 inches and the short arm about 3 inches. IT still works, but it is broken where it attaches to the window frame. I am guessing it is a 39-239B, but want your opinion.

Not sure which part/mechanism would work with my windows. I think the gears on the mechanism have gone bad which have caused them to "click" and not function properly.

Need a part number

Any help for me with this window. Thanks

We have three awning windows in a rental of ours and the metal arms that scissor out when cranked have gotten rusty and broke. So we need new ones. The attached photos are of the only labels and markings we can find on the windows. hoping you can help us identify what we need? Thanks - Duane ... (cont.)

Hello, I installed this replacement awning operator yesterday, and after struggling to get the old rusted one out and the new one screwed in, I noticed that one of the arms has a bend in it that I can't tell whether it is designed that way or damaged in transit. The bend interferes with the abilit ... (cont.)

Hello, I work at a school and we need to replace a few of these window cranks, they have either disappeared or broke over the years. The windows are Milgard, the product # on the window is D-X71645. Any help you could provide is appreciated!

Hi, i'm trying to find this window operator. I've found some that are close. But not the exact one. `The two outer screw holes have a center to center measurement of approx 4 3/16"

Do you have this Milgard casement and awning products or a comparable parts for replacement for my windows? I cannot open over half of my windows due to broken mechanisms. Thank you for your assistance.

Original parts from early 2000, some have already been replaced with ss operator, may need to replace rail on window as well, thanksMike

Hi, I am looking for the part that attaches the arms to the track on this Jeld-Wen Awning. Thank you.

I am looking to replace the scissor arm + crank mechanism for this window. Window measures 19.5in square, and frame/window cutout around it is 22.5in square. Had a repair person take a look at it, and was told the connection between the arm and crank was broken, whole things needs to be replaced. ... (cont.)

I need a replacement window crank