Viewing all customer Discussions for:

39-438B Encore Dual Arm Operator, Sill Mount, Low Profile

Hi there. We are having issues with several of our window cranks.They each spin open line but it seems to be stripped when trying to spin the window closed again. We have to pull the window in manually. The base of the window crank is 5 inches and the long arm is about 10.5 inches.Do you sell a repl ... (cont.)

Hi there - we have A LOT of windows that have broken cranks. A few are 40887. They don't close all the way and some don't crank. I just found out you can get replacements. We are super capable and are happy to tackle this on our own. Thanks! Stef

Hi I need to replace all the hardware for these windows See the photos attached, thank you! I am in Hawaii and will be ordering sets for 3 windows to start. Best, Denma

Do you carry the replacement window crank & hardware?

Markings visible: 31858 41012 Truth

Broken window crank with crank on bottom right side of window

No names or numbers that I can find. Cabin built in 2000, at least 8 windows with gears slipping now. They all look the same, pictures from middle sized window.

Hello I want to change that part I hope you guys can help me to identify the correct part. thank you!!

Hi there,I need new crank mechanism for right side. (opposite side from picture.)Thank you.Kirk

Looking for a window crank replacement for a kitchen window. The crank has a marking of "Truth" and the handle says "Caradaco". The mechanism itself is about 5 inches long. The part of the crank running parallel with the window is about 5 inches long. The long arm is about 10 inches. The curved arm ... (cont.)

I have 2 vinyl windows that need crank mechanism replacement. One opens right, the other left. It appears they are from the same manufacturer. The only identification that appears to be branding is on one handle. Please let me know what you can about manufacturer, model and replacement cost. Thank ... (cont.)

Hello, I'm just looking for what type of crank assembly I need to order to repair 2 windows. Thanks

I cannot find what make of windows these are. I am hoping you will be able to tell what model they are by the hardware that needs replaced. This is a large picture window with a left and right crank out. They are both wore out and need replaced. You can see in the one picture that the sprocket porti ... (cont.)

I've replaced the handle but am still having issues closing the window. The handle doesn't catch properly and I believe the whole mechanism requires replacement.

The gear drive on the Hurd window regulator is stripped and will not close the last 2", has to be pushed or pulled closed

Need for both a left and right window application but the gear on existing operator is centered - not sure what replacement part to order.

Question: to replace this part, do I need the regular 39-253LBor the Low Profile 39-438B? And what other parts go along with it?

There are no markings that I can find on the crank itself. The only marking I can find is on the window itself. C-L C25-36x72. Pictures attached of what I need. Let me know if I you need additional info.

I'm attempting to determine which operator this is. I was uploading photos of it disassembled, when your site either crashed or refreshed, and deleted them. In case I don't have to disassemble the whole thing again, is there any way to determine which one this is? I believe it's a 39-253LB, but can' ... (cont.)

Hello I need casement operators for Hurd windows from 2000.