Viewing all customer Discussions for:

39-439B Encore Dual Arm Operator, Sill Mount, Low Profile

it is a side opening window (over 20 years old from Milgard) with henges on the left side looking out from the inside. In closing the window it makes popping noises with the window not moving. the long arm in the opener is about 10.5 inches long.

Windows were made by Thermo-Gard but no parts info was supplied.I've looked through your website and it appears to me the best match I found was your 39-438B and 39-439B operators.I have multiple windows some right other left opening. Pleas let me know if these are the correct operators and if not ... (cont.)

Gear is skipping

I need the entire hardward - the black slides at the top and bottom for pivot in the track, the dual arm actuator and the associated hardward

I need the operator for this style window with this same opening position. Any options? Thanks in advance

I'm looking for replacement covers for the attached images. There is a short and long handle versions. I'm hoping you can help. Thank you.

looking for a crank operator for a 2020 jeld wen siteline ex. When standing inside, the hinge is on the left

I saw TRUTH 30744 as part of the hardware but there is no marking on this operator

Need right and left side. Part has truth on it

I need the track that this end of my operator(39?438b) will fit into.

These windows are near the ocean in Hawaii. The hardware is rusted and in one location it's turn the plate under the crank into a powder. Any replacement hardware would need to be stainless. When looking at the photos, the photo of the casement hardware shows the weathering of the plate I menti ... (cont.)

This crank assembly is from a Hurd Window. Hurd is no longer in business. This window was installed in 2000.

Hello, I'm trying to match these with the inventory on your website. They are Truth hardware parts and I need top and bottom sets. The part numbers listed on these pieces are 31858 & 40986. We need right and left-handed. Thank you for any help you can give.

I have a Truth 41012 that I need a left and right side replacement for on a casement window. The larger arm is 10 3/4. What part should I replace these with.

I am looking to order truth Maxim left hand dual arm casement operator in white but also need to replace the window slider that's in the photos provided. The model# of the operator is stamped 31876 on the operator. There are no markings on the slider.

Will the "truth folding handle with cover" 39-375 and 39-376 fit my Alpine Series 80 casement windows? I don't need the cover, only the handles. Thanks, Sarah

I wanted to get this bottom part of the window. I attached 4 pictures. The first 3 are from a different window showing the piece we need and the last one is the window with the missing piece. The window is 14.5 wide

Need to replace basically all of the metal components of this window. 8A0442HGSS was the replacement part number Milguard gave me for the hinge. HA6702SK or HA0013SK for the striker plate Would also be good to replace the crank handle assembly if available

Attached are images of crank that i need to replace. (stamped with "Truth") As you'll see the gears get worn due to the 2 interconnecting gears move up and down when cranking and get misaligned. Soooo... I need to put in new cranks. Hopefully what you have will work better than these originals, ... (cont.)

Could you please identify the three Truth cranks in these pictures and advise as to what truth hardware replaces them. Thank you!John