Viewing all customer Discussions for:

39-439B Encore Dual Arm Operator, Sill Mount, Low Profile

I'm looking for fold down replacement cranks for some Millard casement windows. We already tried the Prime Lind TH24086 Entrygard Nesting Cover and Crank and they didn't fit.Please let me know if you have modern fold down replacements for these. Thanks so much,Kristen

Looking for a milgard casement window operator. Purchased it in 2000 or 2001. Thanks. Larry

Looking to purchase replacing hardware identical to this - see picture. It was completed around 2005. Please advise

Looking for this window crank or something that will work

I need these parts. The crank handles I have are still good. Can you point me in the right direction? The internal gears in the ones I have are stripped.

Crank is slipping when opening and closing. What part do I need to replace?

Can you help me in replacing these? I have a few window that will not close. They are Hurd windows from about 2002. Thanks! Mike

Looking to replace the rusted hardware and crank arms for these windows.

I believe Ive gotten these from you guys a few years back but just couldnt remember which it was on the site. Please send me the correct link for purchase. Thank you!

Can you tell me the best replacement part for my Millgard Casement Window Operator? The window was installed about 1999. Let me know if you need more information. Thank you.

Need replacement parts or part numbers

I noticed in my first post that my pictures were blurry when expanded, so I've sent a second set of pictures. TPUTI I is printed on an arm on the top side. 41013, 41016, 41010B, 31881 are stamped on the arms on the bottom. Made in the U.S.A, 05/01/01, and 05:55 are on the bottom of the housing. ... (cont.)

I need window operator shows as attached picture

I have a certainteed casement window (installed 1999) that hinges on the left (when viewing from inside). The crank mechanism has the gear stripped and the bottom hinge is broke. I am looking for replacement parts to repair the window. Would need price, lead time, and a picture of the parts to co ... (cont.)

Please let me know if I can get this from you and at what price

Hello - Looking for a casement operator replacement. see pics. What part do you think I need? Thanks!Kristie

This window is made by Crystal was installed about 20 years ago. The crank cannot close the window all the way as shown in the picture. The window width is about 21 inches. Can you help me identify what parts I need and do you have them? It marked ACER MADE IN CHINA on back of crank and TRUTH on cas ... (cont.)

The operator no longer moves the window

One of my handles has broke off,i it seems that has taken part of the crank (see broken arm picture) for what I understand i would need to replace the whole operator. Would you please point me to the part I would need to buy (picture of an unbroken one shown as well. The arm says " truth hardware, a ... (cont.)

The crank gear on this window is stripped out. I cannot find any markings on the windows saying what brand they are.