Viewing all customer Discussions for:

39-439B Encore Dual Arm Operator, Sill Mount, Low Profile

Hi, I'm on the hunt for the correct spec to ordeer to ensure this otherwise good window needs to properly open and close. Seems it's a dual arm oeprator but not 100% confident in what spec I should be ordering. Hoping you can help specifiy and sell me the part. :) Thanks for your help! ... (cont.)

I have attached a photo of the label and a photo of the window mechanism that I am looking for. I do not have a photo of the part removed from the window. I would need one for a right opening and one for a left opening. I would appreciate the help. Thank you, christine

Part number is 23058 on it but I can't figure out what I need there's 2 windows I need help with one is a double arm crank and is left handed and then there's on in back of house that's a single arm and it's left handed as well but have the same part number

A couple of weeks ago I ordered a Crank Handle to replace a broken one.When it arrived, it fit perfectly, thank you.I have a large issue with hardware on another window, possibly more than one.I need help with identifying and ordering the parts.I made some pictures.My window is on the left, looking ... (cont.)

Kolbe windows gear doesn't engage to close. I am not which dimensions are needed for replacements. Please advise

Hello, looking for help identifying some window crank replacements that I have that either don't work well, or work but crack/pop as the window is being opened closed. I have several broken, but wanted to start with trying to fix one from each side before I commit to buying a ton of parts for all.If ... (cont.)

I am on your web site but couldn't identify my part to buy it . Could you help mr Thank you

Hi am trying to find replacement parts for Simonton casement windows. One size window is numbered 8482928/16. I need top and bottom arms and the opening mechanism

The gear on the operator is partially stripped. Can you identify the part needed from these photos?

Gears pop up and down slipping out of contatct with each other under the tension of use. Looks like they were forced open or closed as part of the mechanism is bent. Both right and left need replaced. Do you know the part #? 39-438B?on arm C-C40-31x55, 40986

Not sure if the whole thing needs replacing but the window wont close anymore

Hurd window crank teeth are worn out and window doesn't close anymore

Hopefully you can identify the Truth casement window cranks that we have. Both the right and left handles have broken. There may be more problems, but to avoid taking out all the wood to replace the gear mechanism, I thought I would start with replacing the handles--if available. If I need to buy ... (cont.)

Is it possible to only install new handles for this Truth 31858 window? I need two handles for the same window (right & left sides).

Hello, I have a casement window which has Truth 30744A labelled on one of the arms. Looking through your inventory, it looks closest to the Encore Dual Arm Operator, Sill Mount (39-253RB). When turning the crank to close the window, the dark gear rises (shown by red arrow) and loses contact with th ... (cont.)

I need to know what the replacement part is for these windows Milgard Studio (east face) Series 5320/5331/5720, PL #032-143 The longest arm Measures 10.5"

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

The long arm is 9 inches, the short straight arm is 4-1/2 inches. I see numbers: 31538a on the curved arm, 45179 on the crank assembly, 40754 on the short arm, a 5 digit number on the long arm which I cant quite make out, first digit is either a 3 or an 8, last digits are 1272. I need a left ha ... (cont.)

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P

good afternoon,I am looking for a few operators for replacements. our window are Milgard, Studio Series 5320/5331/5720, PL #032-143. the operators are not closing all the way. I have submitted 5 photos for reference.thanks,Meagan