Viewing all customer Discussions for:

39-439B Encore Dual Arm Operator, Sill Mount, Low Profile

The track on the window is L-shaped and it is 14 1/2 inches long and the arm on the crank itself is 19 1/2 inches wide tip to tip. The picture shown on the window is not the one I need. I need an opposite crank and track that opens left to right

I need 3 white replacement right Truth Split-Arm Operators for my windows. What would the parrt number be so I can order it from you? I have added photos with a tape measure for your convenience. Thank you.

I need the internal hinges and possible replacement of the handle casing for casement windows plus one screen

I have now 3 windows with the same issue. Can you help? Thank you!

Please quote both the left and right side crank assemblies with screws if available

Truth hardware, maybe 32062.

Hi We need replacement cranks This one is completely stripped and window will not Close, I'm assuming this one is a left sided one ? We also should probably get a few extras. Some of them seem to be starting to go we have 3 that go this way 3 that go opposite way

Can I get this missing guide or do I need a new assembly?

I need casement hinges and cranks two that swing out right to the left and one that swings out left to the right. Then I need 2 accordion hinges that goes straight out for a casement bathroom window.

We need to replace this crank arm. It has "Truth" stamped on it. It measures 4.75 inches at the crank arm housing.

I'm tring to locate a crank assembly it says truth 30744 on it, it's in a bay style window, with one left and one right crank. It's a dual arm style crank assembly.

Good morning, Currently searcing for the complete crank hardware. Don't know the brand either.

I have parts from Hurd Windows and I need replacement

Is there any part I can get to match what is closely in photos attached? I cannot get any info from the window or manufacture label.

Need three 3-arm replacement operators for casement windows. Brand of operators is Truth.

Would like to replace handle with a folding handle with cover but unable to remove existing handle. Which parts need to be replaced including model numbers. Current handle and cover measure 5x1 inch and appear to be permanently attached to operator.

Please help identify for replacement , window about 20 years old

I need to replace 17 crank operators on my Hurd casement windows. The windows are various sizes but the length of the arms appear to be the same. Do you carry these and if so how much are they? Thanks

This is an odd shaped window. Swings open with hinges on side. The operator has little posts on both ends of the arms.

We need hardware to replace rusted out hardware for bottom of windows. I've attached etching on window as well. They are jeld wen casement windows. They are 4 lefts and 4 rights.