Viewing all customer Discussions for:

26-393A Tilt Latch Pair

Can you please tell me what window latches and balances I need ?

My window tilt latches are old and breaking apart. The bottom has come apart and the springs fall out. I have included 3 pics to help identify the actual part if you can please help.Thank you,Kim

The dimensions are: 2 3/8" x 3/4" x 7/16". White. Appears these latches are installed by sliding the back rounded end into place and then pounding the front end into the grooves. This one window also does not close up to the hardware behind it as closely as the other windows, which is probably why i ... (cont.)

I think.it might be an American window from home depot or lowes

2 3/8” long across the top1/2” wide at one end 1 1/2” at the other end (forms a "T")3/8” deep

Good morning, I know that 26-267 is discontinued. Is there a replacement part that would work in its place? Thanks for your help

I am looking to identify a window tilt latch for a Harvey window. The top of the latch length is 2 5/16" and the width is 5/8". It is 3/8" thick. I've also attached a few photos. Any guidance would be great!

These parts are from the Block and Tackle Balance supports on either side of the windows sashes on my Silver Line windows, installed in about 2004. Part numbers on the installed Balances read "33 5 cvm 6" . The springs seem okay, but these bottom fittings which are supposed to control the Tilt ar ... (cont.)

These are parts from an old American Craftsman double hung window, over 20 years. I believe it is Series 1200. What we are looking at is, I believe, a tilt latch (shown installed), a pivot lock shoe (broken, uninstalled) in the second and third photos. Also in the third photo are two views of some ... (cont.)

I need pivot bar case Pivot bar Latch set and Coil balance for small window. Please help identify

Hello, are there replacements for these or should I just get a surface mounted one on top of this? There are images with measuring tape attacked.

Top length: 2-3/8"; Top & Bottom Width: 11/16"; Thickness: 3/8" Dimensions appear to be very similar to 26-393B except for the bottom width. Regards

I am attempting to find replacement balances and tilt locks for a vinyl replacement window.

From window installed by Portrait Homes in 2005

GM, I have 2008 Silver line (Andersen) double hung Window. Over time latches have degraded and broken. Found item 85-900WA but wing portion of latch not wide enough.wing dimensions are 1x5/8 x 9/16 approx. Tyvm

The rod measures 26 3/4,but if you can identify all the parts it would be appreciated.

Do you have a replacement part for this broken latch?

I need a replacement option for the tilt latches on my windows. I have already tried item number 26-408 / 8590 and they did not fit. The ones I tried would not allow me to put the window back in after I had it tilted out. Thank you Eric S.

Can't find any serial number on the window