Viewing all customer Discussions for:

38-078 Truth Hardware Casement Lock, 2-3/8"

Hello Can you please see about matching this window handle. Also- we need to the catch or keeper that the handle sits in on the window. Thank you

Casement windows is all info I have

Hello,We have a 1956 house and need to replace four or more of the arms. Please let us know if you have them in stock and the price. Thank you,Jeff and Maria

I need to replace these cranks and latches. there is also a spring loaded holder for the screens

I own a home that was built in 1950 which has casement windows looking for the locking handle or latch. It has mounting holes spaced at 2 -5/8 and a 1/2" latch opening.

2-3/8" hole spacing 1/2" cam slot

Is this casement lock available in dark Bronze? This one looks a bit different from the 24 series locking handle. The front mount holes are 2 3/8 and the throw where it grabs the catch is 1/2" Perhaps I'm not looking at the correct latch? Perry

I need to replace the lock and closer on some old windows. Would you have these parts.Skip

Hi. Looking for a replacement latch for a metal casement window from the 50's/60's. Thanks for your help.

The dimensions on the latch are center of holes 2 1/2 inches apart they are threaded to accept screws the latch is 3/16 wide and sets in 5/8 inches. The dimensions on the crank are hole centers 5" apart, Threaded the short arm is 3 1/2" long and the long arm is 9 1/4 inches long

Good afternoon, looking for latched for my metal windows

I am looking for a crank arm assembly for a 1950s window. The window frame is 19 1/4 inches wide, the crank arm is 8 5/16 inches on its longest edge. The crank would be on the left side. I also need the locking mechanism Thank-you

Looking for replacement crank arm for windows. Both are on the right side as looking from inside out. Also need 1 closure that is on the side of the window and 2 crank handles. Greatly appreciate your help Diane

Above I send 2 pics showing window with part that is missing as well as window with part that is needed . As per my conversation with mike he is thinking it is a tie bar .. thx in advance

Hi. Our home was built in 1948. Several of the locking handles are broken where it engages into the window frame as described in first photo. I have both left and right handles as well as single handles. Are these available?

Welcome to SWISCO, Robert. Start your search off with taking a look at our 38-078 casement lock. Look over the measurement specifications and see if this would work.

Please help me identify the replacement locks I need to get. The kind I found in local hardware stores have too short of an arm that swings out and doesn't catch the part on the window. The 1st pic I loaded shows the too short one.

No name hardware. This is vintage late 70's early 80's (this is what I am told). Looking for the tabs. Also looking for the handles. They are left and right handles because the handle has a sweep.

2 3/8" Hole spacing 7/16" cam slot

Hi, I am looking for the windows operator to replace my bad ones. Please help me to find the right one in your website. I attach the pictures. Thank you very much!