Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Hi, we have casement windows from the 80s and are wanting to update the operators. The number on it is Truth 30382. It looks like a dual arm and the large arm is appx 13" long. I cannot seem to find one with this spec. Can a single arm work? Can I reuse the smaller arm? Help! Thanks, Joe ... (cont.)

The crank in our Bonneville casement window is stripped and I have to push it initially to open it. Once opened about an inch, the crank then works. My assumption is that I need to replace the full crank unit. I am attaching phots of the crank (white), the window sill where the crank unit attache ... (cont.)

The operator appears to be stripped , I would like to replace it.

Hi, the long arm with the angle near the crank has a small plastic wheel which rides in a channel under the window; these pop out of the track where there is a small cutout in the side of the track where the wheel would slide thru to install into the track. The arms have a bit of vertical 'looseness ... (cont.)

Hello, I'm needing 2 left and 2 right casement operators. I'm converting stationary window to operable, so I will need hinges, locks and all hardware associated.

Need a replacement part for a 45136 hinge

This is for a older Caradco window and need entire cranck assembly

Need crank assembly and is there a spammer tool to tighten up the play in the crank

Good morning. I need to replace a few operators and latched for my casement windows and am having a difficult time deciding what I need to order. Please review the pictures attached and let me know what else you may need to help me make this decision. I am selling my house hopefully next Monday an ... (cont.)

Hello, I am looking to replace the window operators seen in these two photos. Window one seems to have the number 6077. Window 2 has the number 3095. Please let me know if you need any additional information to help me purchase replacements.

Casement window hardware is from a wood window made probably around 1969. The dimension from the hardware can be seen in the photos. The hardware is brass colored. The particular part has failed and will no longer engage to open or close.

This may be a duplicate email but I didn't have the photos attached on the first one. ANyway, I'm looking for the crank assembly for a casement window that opens on the right hand side. The track is 10" long, the longest bar is 11 3/4" to the bend in the bar and the short bar is 5" long. The slider ... (cont.)

Hello, I bought a home that was built in 1976. Every window is a casement window and the crank handles have R.O.W on them. The problem I'm having is the yellow plastic slide piece is deteriorating and causing closure issues. Thanks in advance.

The arm is almost 12 inch, any replacement? Thanks

I recently purchased many Caradco replacement parts from you thinking that's what I needed. Took apart window to find this piece doesn't match anything I purchased from Swisco. Nor do the Swisco replacement items make sense for what the window has.What is this that I need to replace to make my wind ... (cont.)

Please let me know what other info you need from me to identify this window operator. Thanks for your help!

Hello-I need to replace the single arm crank and associated handle assembly for a caradco bay window. Could you point me in the right direction for part numbers for these parts? I would like numbers for both the right and left hand assemblies. Thanks!Mike

Existing Truth operators are 30yrs old and gears are failing. I would like to replace the two operators with new ones. They are for right-hand windows. Parts are marked Truth. The hinge arm has the number 40887 on it (see photo 2624). The main arm (long arm) has the number 40255A on the bottom. ... (cont.)

I have Norco casement windows about 13 years old. I need to replace the hinges on two windows - a right hand and left hand pair. The operators are kind of loose and I would like to replace them also. I like the style hinge that has the offset adjustment nut to align the sash in the opening. I also ... (cont.)

I recently looked at a Caradco casement window that had 1967 stamped on the glass spacer. I am trying to find a replacement for a straight arm operator. The arm is 13 1/2" long and the width of the base of the operator at the sill stop is 4". There is one screw through the body of the operator. ... (cont.)