Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

This may be a duplicate email but I didn't have the photos attached on the first one. ANyway, I'm looking for the crank assembly for a casement window that opens on the right hand side. The track is 10" long, the longest bar is 11 3/4" to the bend in the bar and the short bar is 5" long. The slider ... (cont.)

Hello, I bought a home that was built in 1976. Every window is a casement window and the crank handles have R.O.W on them. The problem I'm having is the yellow plastic slide piece is deteriorating and causing closure issues. Thanks in advance.

The arm is almost 12 inch, any replacement? Thanks

I recently purchased many Caradco replacement parts from you thinking that's what I needed. Took apart window to find this piece doesn't match anything I purchased from Swisco. Nor do the Swisco replacement items make sense for what the window has.What is this that I need to replace to make my wind ... (cont.)

Please let me know what other info you need from me to identify this window operator. Thanks for your help!

Hello-I need to replace the single arm crank and associated handle assembly for a caradco bay window. Could you point me in the right direction for part numbers for these parts? I would like numbers for both the right and left hand assemblies. Thanks!Mike

Existing Truth operators are 30yrs old and gears are failing. I would like to replace the two operators with new ones. They are for right-hand windows. Parts are marked Truth. The hinge arm has the number 40887 on it (see photo 2624). The main arm (long arm) has the number 40255A on the bottom. ... (cont.)

I have Norco casement windows about 13 years old. I need to replace the hinges on two windows - a right hand and left hand pair. The operators are kind of loose and I would like to replace them also. I like the style hinge that has the offset adjustment nut to align the sash in the opening. I also ... (cont.)

I recently looked at a Caradco casement window that had 1967 stamped on the glass spacer. I am trying to find a replacement for a straight arm operator. The arm is 13 1/2" long and the width of the base of the operator at the sill stop is 4". There is one screw through the body of the operator. ... (cont.)

I'm looking for this window operator. Please let me know if you need anything else. Thanks

Hello! My husband and I just bought our first home, it was built in '81 and we believe these are still the original windows. I found Caradco listed on the current operator handles. We have multiple windows that are missing cranks and we also have some locks with no levers or levers that have fallen ... (cont.)

Hello, I am looking for a casement operator. The handle mounts to the left, arm goes to the right. Color of bronze or beige will work.Arm is 13-1/2" long. The arm has number 40052B stamped in it. Thank you

Need 2 # 40056 , #3, 143/4" right hand Need 1 # 40055 ,#4 , 143/4" left hand Need 1 #40056, #4, 103/4" right hand

Hello, I have a single arm window operator that doesn't work anymore. It is about 12 inch long. I need a replacement but could not find manufacturer information. Can you help to identify? Thanks Bob

name on handle either barton or burton. worn over. opening rod is 12 inches to bend can u help

I have two Caradco casement window cranks (R and L) that need replacement. I cannot find an exact match on your website. I see similar ones, but mine is 13-1/2?. Can you suggest a replacement? Do you need other info that I can provide without removing what I have?

I need to replace the crank, case, and handle. Handle seems to have a small "r" on it. On the bottom is the number 40055 and a window with a "T". The arm is 13 1/2" and the screw holes 3" apart.

I have several casement windows that need replacement operators. The attached picture is actually a previous customer of yours, but it is the same item that I need. My question concerns the replacement operator - does it include the part that attaches to the bottom of the window frame - I will call ... (cont.)

I am told I have Norco windows that were installed in 1994. I have a handful of operators that are not working and see they have "Wright" stamped on them. I have attached a few pictures in hopes you can find replacement operators for the broken ones. The arms are 13 1/2" from the middle of the c ... (cont.)

Hi. My 1986 windows stink and we're looking to replace all hw as someone said it might be oxidation. The hinge shows Truth 30751. I think the operator arm is 13.5". I'm looking for parts to replace operator/crank, top and bottom hinges, and rail that the operator pin slides on (is 11.75" long and ha ... (cont.)