Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

need both left and right want to confirm size think 13 1/2 need model # TY

I have a casement window that is over 30 years old. I need a replacement for the left window crank - do you have a replacement that will work with this? Thank you in advance for your assistance.

Hi! I have 4 casement windows that no longer crank open. The gear thing seems to be stripped; the handle just spins. Please if you can help figure out a replacement, that would be so great. Thank you!!

Truth 45251

I need to replace cracked and missing operator arms and cranks for a set of windows in a 1979 split level house. I found Rimco part # 40056, and need both left and right arms, cranks, etc. The operator arms have a curve in them so am not sure what to measure for length? Thank you for your help! ... (cont.)

Replacement for crank out windowOn the back it appears to be made by TRUTH there is a part number above the truth logo 40055 there's a number six in the corner and I each in the other corner these are on the back of the unit that I took a picture

I'm looking for some help identifying what model window crank and arm I need. Any help would be appreciated. My name is Gary. Thank you

The previous owner of my home installed HURD casement windows in 1988. I have 2 window cranks that are worn out and have the part name WRIGHT 07701-00. I would like to get these replaced, 1 is right side crank and the other is left. I am looking at the the following 39-013 39-014 39-114L Am I look ... (cont.)

These are the operators for side opening windows They are attached to Windsor Wood Windows Truth 40055 is marked LH and I need 4 of these Truth 40056 is marked RF and I need 2 of these

Trying to repair or replace Andersen window cranks and need part number. Any help is appreciated! Our house was built in the 60s. Not sure if they are original but they are no older than that.

I need to buy two complete sets of casement window hardware. a right and left opening. 13 " arm. Probably from an older caradco type casement window . Can you help me. Thanks, Wayne

Our house was built in 1974. I believe these to be original windows. There is no marking on the class for a company brand. The crank handles say LTBEST. The back of the crank says P-234-DC. Some of the cranks don't open at all. Some are missing the part that the handle attaches. Some do open but it' ... (cont.)

Hello, just trying to identify a replacement part or a substitute for this part. The arm is about 15.5" long. Can't find replacement. It is champagne/aluminum finish. Any help to identify the part and where i could order it would be appreciated. Thanks

ZK4 with a spade around the K

Window opens from the right side. Hinges are on the left. Window crank has wright 8D87 on the arm.

Original windows 1970 build. No Identifying Mark's. Some operators previously replaced

I have 4 windows....need four left and 4right (side frame) lock (8 total) and 2 right and2 left for (bottom frame) sill crank (4 total) (at least I think that's what they're called...)ThanksLinda

The post that you slide the lock over is rusted off. Can it be replaced separately? If not what is the correct part number to replace the whole mechanism?

I need a few of these. And I need some missing handles. Bronze maybe oiled bronze color Thanks RickI also need some for another type of window see photos

Need hardware for m & w casement window