Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

white, left hand, squarish operator casing. roughly 13" arm. I have a good picture.

I am looking to replace these parts: The window operator is 13-3/4 as is the track. It is Right Hand. See Attached pictures and please let me know which replacement parts I need to order. I would also need to order a replacement Spline. Thank you, Raul

Do you carry the replacement window regulator to replace the one I need as shown in the images attached??

I have multiple windows that will need cranks but I want to start with just this one. My contractor ask for this one a hinge and a crank but the other windows just seem to have crank problems. Love your help on this. These are Crestview windows [came highly recommended???] purchased in 2003. ... (cont.)

Hello.. I need 2 left hand and 2 right hand.. rod is 15 inches

Is this enough for you to identify this operator? I had the end of the tape at the end of the arm.

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

The window feels like it's going to fall out as soon as I start cranking because the anchor point at the outside of the window is out of the track. This window is a good 20 feet off the ground so it's difficult to handle from the inside. Can I crank it all the way out to get that piece in there, o ... (cont.)

I need to replace the crank/operator. Can you help me figure out the parts I need? The window crank unscrews and can open but not shut the window anymore.

Looking for this part. There are no other markings on it. The handle says Row

Hi I am looking for the arm 5-1/4 Right It says truth but I didn't see a number

Hello, I have the "Truth" crank operators that will not open and I am not sure what to order. Please see the attached pics. Thank you, Darrell

Hello My Truth Casement Operator is faulty and needs t o be replaced. Could you please suggest a replacement? Thank you!

Got a couple of windows I want to replace the crank/operator. What parts do I need? Long crank arm is 15" from curve in arm to end. The other part connecting to the window has 6" and a 7 1/2" arms. These are old and have Wright stamped on them

I am in need of eight left hand cranks and two right. The arm length is 13 1/2 inches and the color is bronze. can you please send me a specification sheet on what you offer and the price? Thank you, Carrie

Looks like I can remove the operator only by first removing the wooden sill cap that covers it, and sliding the long arm all the way off the window to the outside end with the operator still attached. No problem physically, it's ground level. The guide channel is dadoed into the bottom of the sash ... (cont.)

The shaft has separated from the operator. The brass gear that locks in the shaft can not be screwed back in properly. So I believe I will need to replace the entire casement operator. I don't see the name of the window anywhere on the frame. I have attached pictures of the current casement oper ... (cont.)

I am looking for a replacement part for a truth casement window arm

Came off a certainteed window

I need 16 Truth #34 casement operators- all on right side, looking outside, plus 8 latchesAll in dark brownThe size of the lever did not seem to match anything in your cataologCan you provide the partsJeff