Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Weathervane casement window parts still available or is there a replacement? Looking for rh & lh.

I'm traveling so I don't have any numbers. These are circa 70s windows. Various arm lengths. Pic is a bathroom window arm length approx 9in. LMK what else you need

From center of crank, arm is 13.5 in long.It's a RHMade by TRUTHPART # 45136(see pictures)

Hey guys! Just looking for a replacement crank for my window. the gears in this crank keep slipping. I was wondering if you guys have the replacement for it. I looked through your inventory and I think this is the closest. Product code 39-014. The crank is made by truth, US. PAT 4505601 RH 45136 CA ... (cont.)

I have a caradco 30382 however it is not 9 1/2" so the 39-028E and 39-027E will not work.Any thoughts?ThanksRocco

I am in need of 2 casement window operators one right hand one left hand. windows and operators are identical and mirror images of each other. both have one arm out of the operator and have a shorter arm connected to the window sash from the frame. Some identifying features include; etched into the ... (cont.)

I need 2 right, 2 left, and 1 awning operators as pictured. The awning operator has been removed so I'm hoping you will have an idea of what it should be based on the style of the casements

The windows are still good but the handle has stripped. I have a smaller casement by the same company that I might also want replaced. The part number is the same on the handle The second window is narrower and shorter but also a casement; I can send you pictures of that also if you have the par ... (cont.)

I have bought parts from you prior for my TRUTH window parts. My neighbors are also labelled TRUTH but are very different shaped than mine. I am trying to find parts for him.

Need to replace the attached window cranks. I would like to match the style as close as possible.

Backside has the following # engraved: 45035-RH. This is one-piece, straight single arm.

I'm trying to find a replacement for this brass/gold colored LH casement crank.

Most of our windows are okay, with some that still have working mechanisms but the plastic part located at the end of the arm is not removable and comes out of the track on the actual window itself when you try to open it or close it. Therefore, we are looking for at least 4 complete sets. ... (cont.)

This operator is similar to the 39-221 but I need stiff arm.

I need a Truth straight arm operator that is 12-1/2" long

Can you advise what I need?

I need to replace two (RIGHT) window crank operators. The pictures are of the matching left window (screen is easier to remove on that side). The arm is 13.5". I can provide additional photos if needed.

I work for a lumber yard and a customer called to find out if we could locate parts for his 1995 Mercer Windows. I need the operators for Mercer casement windows in white. I need a price on both left and right hand operators.

The crank is a Wright # 7703. The arm is about 13.5" and the hole spacing is 3".

I have a broken 4" wide casement operator that has the number 40055 on the bottom. It has an 11" arm measured from the center of the hole to the and of the arm. What is the replacement for this? Can I just get the operator and keep the existing arm? See images attached.