Viewing all customer Discussions for:

39-023 Rear Mount Casement Operator, 11"

US PAT 4505601. 40223 40063 both numbers listed on inside. 40050 listed on arm, also "TRUTH" with an arrow Need 4 right crank and 4 left crank

The operator arm (I think that's what it is called) is bent/twisted. I think I need to replace that and the bottom hinge or the egress window. The top one is working fine

white, photos with tape measure. gear stripped, no longer opens when cranked.

Hello I need to find a replacement crank assembly but I need it for opening in the opposite direction than my pictures. I do not know the window manufacturer. Thanks in advance

Please let me know if you have a replacement for this

Hi, I have a window that cranks out. The operator has broken. I do not know which operator to buy. I took a picture of the window sticker. Could you help me identify the correct operator. Thank you. Chris

Hello, I have attached photos with measurements on some parts that broke on my window. Please let me know if this is adequate information to see what the new part is. I am sorry that I did not send pictures of it installed, I found this option after I already removed it. I also found what I believe ... (cont.)

The picture is the left side, we need the right side crank. The window is in a closed position and won't open. Can you identify what we need, found a tag that says Traco on the lock. It's cold out and they don't want the window open, so I can't remove it yet. So, if you can't identify I'll ha ... (cont.)

I am a property manager in need of several parts for this type of window please get back with me so I can order parts or complete operating system for this type of window. The single straight arm is 11". It is face mounted like,39-141 but the screws go from the outside toward the inside of the hous ... (cont.)

Not sure where I can find these replacement cranks and sliders, I'm in Chicago I'll 60641, any help will be greatly appreciated , there is no model number on the parts except a pat. Number which is 4505601 and there is a name on the part which is (truth).

I am trying to locate a control that looks like the one pictured. It measures 11" arm length from the center of the gear crank to the center of the bearing at the end of the arm. This one mounts with screws from behind. Is this a product you have?

I have some casement rear mount operators the style matches your 39-023 but it has a 9 1/2" arm not 11" what number do I need

Hello, does the Truth 11" single arm rear mount casement operator come in white? I noticed the 9" version come in alternate colors but not the 11" version. Thanks.

Good day. I wanted to know if you had part number 39-023 but with a 9 inch arm in bronze. I didn't see it in the parts section. Thanks, Keith

I don't know who the manufacturer is. The hole pattern matches the 39044 configuration, but the arm is 11" long. The number "40067" is stamped on the arm. The operator has threaded holes and is mounted from the backside (window frame has through holes). The channel guide resembles 39504 and ... (cont.)