Viewing all customer Discussions for:

39-025 Awning Window Crank Operator

Thank you for having such a great web site. Trying to match the crank assy that I sent pictures, the 39-025 is very close but the bottom screw holes are offset a little and the connector arm is a hole and your looks like a pin. Please let me know if this is the closest or if you have a better ... (cont.)

I have attached four pics of the window crank that I need to replace. It is identical to your part number 39-025 except the 2-1/4" dimension in your part is 2-3/8 in mine. Will 39-025 work, or do you have a perfect match? Mark

This crank has no names or numbers on it. Hopefully you can see the measurements. Crank is part of windows made about 20 years ago in Philadelphia. The crank operates 4 panels of glass each measuring 10" wide x 36" long. Hope this helps. Thanks!

Hi - I hope that you can help me to identify a replacement window crank. We have about 20 of these Airmaster windows in the house that we just purchased and they all need new window cranks. The windows are about 20 years old. The distance between top and bottom holes on the window frame is about ... (cont.)

The dimension of the lever is 2-3/8, not 2-1/4" does it make that much of a difference?

Hello, I'm looking to order up to 10 of these. Any help would be greatly appreciated. Thank you

I ordered and recieved 2 window operators that loked like the correct replacement. It was real close pu not correct.The item Number is 39-194. The bolt alignment vetically was correct but horizontialy was not with the two screw holes. That would have been fine as I could have drilled anew hole. Unf ... (cont.)

Part #115000-3 Looking to purchase a left and right controller

My beach house has these old horizontal windows on the screen porch. Two of the window cranks have stripped. I am not quite sure which crank would work, so I am wondering if you could guide me. Thanks. Mario

Hello reader(s)! (I believe that) the corkscrew part is broken off. It looks like I have to drill out the (rusted) (non-nut) part in #4, correct? [Why does this have a philips-head-screw-looking thing, then?] Then the new/replacement hardware comes with the bottom piece (that the two upright pie ... (cont.)

The OC length between the holes on the Arm extension on mine is 2 and seven sixteenths rather than 2 and a quarter inch. Would this still work?

I have a crank very similar to 39-025 only attachment to window levers are not by screw but retaining ring.....do you have this model or will yours work?

I am trying to buy the right replacement part for an awning window operator. The crank opens the windows but does not close them. (It does not appear to be connecting in the direction to close.) The windows bear the name

Good morning. My name is Greg and I reside in NJ. I also have a second home in PA in the Pocono Mountains. In that home I have a room with several casement style windows without any markings. The room has a sliding glass door with matching framework and indicates it is an Andersen glass door. The ca ... (cont.)

Hi, I would like to find a replacement window crank operator. I'm looking for a right handed model. The mounting dimensions are as follows: vertical 5-1/4 and horizontal 1-1/8. The overall link arm length is 2-15/16 to 3. The pin to pin length of the link arm is 2-3/8. Please let me know if ... (cont.)

do these operators come with handles,bolt washer and screws? much mahalo,Erik

What part number is needed to replace this window crank? See Attached. This is a vertical mounted assembly with two mounting screws at the base and one at the top. Casing is 6" top to bottom. 2 1/2" center to center on end extension arm. 2 1/2" from center of geared pivot point to center ... (cont.)

pat no D-1982620 RD 1963 CAN RH

Looking to replace the cranks on my awning windows. They no longer turn the window in. The handle comes right out with the crank screw attached. 32R on th erotating part of the arm to the window Pat. No.198202 U.S Inside Casing 2 R.H. RD 1963 CAN Inside Casing 0 bottom/side aginst windoe betwe ... (cont.)

I am replacing two of the following Crank for awning windows. the only info i have is the patent Number inside the crank. D -198202 what could i replace it with ?