Viewing all customer Discussions for:

39-026 Awning Window Crank Operator

I am in need of replacement for this particular part for my windows. This who casement gearbox

In search of a right and left hand crank. The current ones don't work and have no names or numbers on them.

Looking for this crank for sunroom awning windows. Center to center on bottom holes is 1 1/8" top to bottom is 5 1/4". The arm is 2 1/2" center to center and held onto the rest of the mechanism with that c clip. Also it's for the right side. Need 3 pieces. Thanks

My house was built in 1973 and the orfinal crank windows are in the porch that is a 3 season room. The windows are in good shape but need new cranks. The windows were either Anderson or Pella I believe. Is there any way to get replacement cranks. I was unable yo fine this specific crank in Lowes or ... (cont.)

-as shown in pictures: The part that moves with the handle) is shaped to curve facing up. My original handles all have that part curved to face down. When my original part is closed nothing sticks out. When the 39-026 closes there are gear teeth sticking out and because of this I just can not close ... (cont.)

Right side crank device won't close. I see no markings. Attached on inside with 2 bottom screws and a screw on the top.

There are no names or numbers on the crank.

The arm is about 3 1/4 inches long, the screw holes are 5 1/4 inches apart.

Need help replacing window cranks. No numbers, but one long rectangle indentation on the face of the crank. I also have trouble hanging the storm windows/screens each spring & fall - the clips are old and screws are stripped and nothing seems to line up right. Could you help me find something that ... (cont.)

5 1/2" upper & lower mounting hole 2" bottom plate with 2 screws 5/8" between screws Length of arms: Top 4" Middle 10" Bottom 4" That's the best I can do

These are the cranks for our porch windows. Looks like they can be mounted on other side of the window with a small plate that would cover the hole on the side that does not have the crank. Several are stripped and non functional...What would be the best crank option to replace them? I'm thinking 39 ... (cont.)

I need 2 crank assemblies for awning windows Plus screws for outside 2 leverWould you carry this crank assembly and if so I would like to order 2 and 2 outside screws for the lever

Need 1 awning window operator

Pat # 198202 2 R.H. Rd. Can. I need to find replacement crank operators for my windows on a 3 season room

1. I am looking for some white crank assemblies like in the 2 pictures above. Screw holes 5 1/4" on center 2. I am looking for aluminum tabs to hold screens in place with screws like picture above. 3. I am looking for aluminum covers for hole in aluminum frame like picture above. ... (cont.)

I am looking for a replacement for my awning style window operators, but am having trouble finding any with the exact dimensions of my current ones. They are Right-Hand, L-shaped operators with a 2-1/2 inch link arm. The distance between the mounting holes (from top to bottom) is 5-1/4 inches. Th ... (cont.)

Hello:We need to replace our window cranks on the sun porch. They are all breaking. The screw that has the splines on it are pulling out of the window crank body.This is the part number D-198202 RD 1963 CAN RH. Do you have replacement for this?Thank you for your help,Bill

HiThis is from a very old awning from 1969. I doNot know the manufacturer but was hoping that you could hel me find a replacement. The pics are from a replacement piece. The original is actually silver. Thanks in advance for your help. John

i purchased the 39-012 Superior window crank.pictured below is the female receptacle located on the far right side of the old window arm into which you screw in either the 39-074 or 33-067 screw.i need this female piece as the one that is on the original arm attached to the old window crank arm is f ... (cont.)

Take a look at our 39-011 and 39-012 operators, compare the dimensions of our parts to that of yours, and see if these will work for you.