Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

need 1 operator LH arm length 9" need 1 lock on left side looking out

I need a replacement operator for a Semco casement window. The brand name "Truth" appears twice on the mechanism, along with a capital "L" and the number 31538. I hope you can identify the needed replacement part from this information.

we need to replace the whole gear mechanism. Thank you

I'm looking for new casement operators. I am not sure of the window manufacturer

Hello I believe that this is the entry guard operator, but not entirely sure, the arm is roughly 9" however I measured to the sill so the 10 3/4" to the center could be correct. please let me know,

I'm looking to replace this operator with something compatible where the handle folds flat rather than sticks out. Could you please recommend a compatible operator?

Hi, I just purchased the Subject part and thought I had the right one. All the measurements were spot on. But I overlooked that this has a downward offset. I realized I'm looking for one with the same measurements, but with an UPWARD offset. Do you carry them? If so I will need to exchange the one I ... (cont.)

Looking for this Pozza hardware replacement for a casement window....right handed facing the outside from interior. Need the complete fixture. Thank you. George

I'm looking for replacement arm and crank for this type of window - house was built in the early 80s

I am looking for this hinge crank for a small bilt best window about26-28inches. The stamp on the 10.5 arm is entryguard truth 30842R. Can u help with the info I have provided?

Hi there. I'd like to make sure I'm ordering the right part. I need a casement window operator replacement for the one in the attached images. Is that something you can help with? Thanks, Marco

This hardware is on a Pella window installed in 1989.I need hardware for a right window. The crank has come out . With manipulation you can get the window to open. I cannot get it to close.On the hardware is "Entry Gard" .What Hardware do I need?Thank you Randy

entry guard truth hardware, some numbers show in the photos, the assembly is broken and the windows don't crank out. I believe they are either 39-155/156 or 39-333/334 but I cant tell which, I need 4 lefts and 2 rights. Thanks

Hi, I am looking for these left and right window pieces, they both broke the lever to open the window, I attach photos. Thanks.

Can someone please help me with this part I have 4 window cranks that I need to replace? they will no longer open the window. Thank you

I have Semco windows were window cranks are broken. Windows are from original construction 1990. I have six to replace. Three left opening. Three right opening. David Moxness

Photos show the operator on the window. I would need the parts for both left opening and right opening windows. The hardware is by Truth Entry Guard. Numbers on the short arm are 20810. Numbers on the other are 30842R. Thank you in advance for your help. Jim

I did not see this option before sending a separate email. Need a replacement window crank mechanism. Long extension abut 8" and shorter cross extension is 4 3/8". Pozzi windows.Thank you for your help.Don

I need to replace the geared part of my window operator. It has "truth" stamped on it. The brass portion that holds crank handle has deteriorated and no longer keeps the handle in place. I have included two pictures. Thanks, Milton

Good morning. I need help identifying parts and manufacturer?David