Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Hello, I have windows that were installed in late 90s. I am trying to figure out the parts/mechanism for those as well as who the manufacturer is. I have pictures of some ares that have the following marking: EntryGard Truth, Del Mar Toronto, 31538. The most important thing is who is the manuf ... (cont.)

Hello- I have several older windows in my house, and the cranks to open and close the windows need replaced. I found on one of the arms #20544. Can you show me or help me with ordering the correct replacements?

I need a replacement. How can I get on. It's a left window. Thank you

Entry Guard TRUTH is stamped on the long arm. 20810 is stamped on the shorter arm . 40471 is stamped into the mounting plate. I am not sure which parts to measure (I don't know the names of specific parts). The problem is that the gear teeth have worn down on the gear that makes contact with the ... (cont.)

Dear Sir or Madam, Mine marked Entry Gard Truth, on the main plate upper hand corner is 40471 and crooked elbow is 3084IL and measures about 4. 7/16". Please advise Thank you Phil

please give me the part number i need to order replacement cranks. thanks greg

This is an older bay window, the sticker says Eagle window and door inc. Want to get different hardware some of these are broken and would like a different color.

Entryguard truth 20810A

I would like to order the roto gear for the window in the photos. It is the left hand window. Thanks for your help.

I would like to know what type I whole unit I should get . This is KK unit the small arm # on it 2810 . Also how do I unscrew old unit with the wood covering the unit that does not pup up . Thanks Aldo

Hi, I have two wood casement windows 26 and 9/16" wide. The white plastic crank cases are mounted on the left side of the 1st window and the right side of the 2nd. The track on the bottom of each window is 11 3/8" marked w lettering "Depress arm to detach" and "Truth" The bottom arm on the crank as ... (cont.)

We have a window with a stripped crank that won't open with turning. The metal extension rod is labeled "Entry Gard TRUTH'. With the number 20610. I haven't removed any pieces of the handle from the window. Can you tell me what part(s) I need to be able to operate the crank-open/close feature. ... (cont.)

I have Semco casement windows that are about 20 years old. They are in pretty good shape but I'm in the process of refinishing a number of them and need to replace some components. Can you tell me based on these images what parts I'll need? Thanks, Remig

I am trying to find one of these window hinges

Need identical opener and handle gears bad also handle stripped handle has to clear wood ledge there are five windows in a semi circle

Hello. I'm trying to find the appropriate replacement part. for a Marvin casement window, manufactured around 1994. Please see the attached photo and let me know.

1984 Lindal Cedar Home in Worcester Ma. 01609We are a contractor tasked with replacing casement window hardware.I hope the pics are sufficient to identify the replacement parts needed. I can get a tally if you're able to supply these. Thanks in advanceBo

Need to replace a number of KK window mechanisms in 35 year old log home in Wisconsin. Most come off track and cannot be closed for inside house. Photo of one crank unit is completely broken. quantity TBD (estimate 16+) Photos added show broken crank as well as the arm that is off track. Let me ... (cont.)

Operator shaft piece isn't able to close the window. It can pick up the gears to open the window but just rotates on closing. It looks a little striped. Is there anyway I can just replace the shaft piece? The screws attaching the dual arms to the window look almost impossible to reach unless the who ... (cont.)

Long arm 9", short 4 1/2". Base 4 7/16" wide at front lip.