Viewing all customer Discussions for:

39-036 Truth Hardware Entrygard Dyad Window Operator

I'd love some help finding a replacement mechanism, the cover and the handle for the above photos. Thanks so much!Marty

The crank is not closing or opening my window and I'm trying to identify the correct parts need to repair my window. Do you have any suggestions on the appropriate part(s) needed.

Looking for the following parts 3- left crank assemblies Set screw for a crank handle I have the flowing part # 30847R 30841L 31229 I also need one arm that goes from the Stud bracket and the window. All windows are 12" wide the cover for the crank is 5 1/4" wide. Color not sure but bronze or brown ... (cont.)

I need parts I don't know need left and right side

30842-R is the truth cranking mechanism in my current windows. Are either your 39-035 or 39-036 compatiable as a replacement part? Thanks. Regards,

I need to replace the crank out parts on several windows.

please help me to identify the part

I need a left casement operator. The length of the upright arm in the picture is 4 1/2, but I only see a 5 inch and a 3 1/5 inch available on your site. Could you direct me to the correct operator. The number on the operator is L30841 (Truth). It is more than 30 years old. Marie

I'm thinking I made need parts 39-036 and 89-035 but I'm not sure. The only markings that I can decipher are 3084IL and Truth. Thank you

I have old truth operators model(?) number 30637. The window opens from left to right (looking from the inside). I believe Product Code 39-035 would do the trick. Can you please confirm? Thanks.

Can you please let me know if there is replacement parts for?

If I send you a photo will you be able to identify the replacement part?Thank youErnie

Need replacement parts for casement window. 1st pic, bottom part with no identification on it. 2nd pic, top part with numbers 40942. Can you help me out with a replacement

I ordered one 39-035 and one 39-036. When trying to install the mechanism I discovered the extension arm is shorter than the original. Is there a different model I should be looking for?

I ordered 39-036 but I made a mistake the one thats the opposite this part. what is it?

Eagle window. I need a right and left hand replace. Also need several handle covers.

I'm looking for a left hand Pella hinge arm assembly for 2 wide window. I've attached a few pictures of the window assembly I'm looking to replace. Please let me know if any additional information is required in order to identify the assembly part.

I need 2 complete bottom pivot assemblies for 2 casement windows, 1-right hand and 1-lefthand. All I have at this time is this 1 picture and "trust" inscribed on one of the pieces.Any help would be greatly appreciatedThank youScott

I have Truth brand openers 30841L, 30842R. It looked like I needed 39-035 and 39-036 of your openers. But the piece that goes to the linkage on top is straight, and mine has a slight bend in it. Will this make a difference or do I have the wrong opener picked out? Thanks in advance for your help. ... (cont.)

Both Left & Right sides. Windows are from about 1983.