Viewing all customer Discussions for:

39-058 Stanley Operator, Right Handed

I don't see a part number on this crank. Can you help if it?

I don't see any markings on the crank nor the windows themselves. I'm looking for replacements for both left and right.

Unfortunately there are no markings on the crank that I took off. The connecting hole is 3/8" diameter and connects to the window linkage via an "E" clip. Note the slight offset in the connecting link. There are several cranks that need replacing but I would like to start with one just to make su ... (cont.)

I need a replacement "bronze awning window right crank assembly" for PAT. NO.198202 U.S. 2 R.H. R.D.1963 CAN

Pretty sure the window is made by WARE, Miami FL. Control box is about 5.5". The box is pretty much empty. The piece that connects to the window is missing

The Awning Window operators that I need match the Stanley 39-058 in all dimensions except the extension arm. It measures approximately 2 1/2 and is only minimally offset. The 39-058 arm is 2 3/8 and is off-set a bit more. Do you think the Stanley 39-058 will work, or is there another Operator that y ... (cont.)

Stanley part # 10-8231-RH two screws on top and bottom 5.25" apart. The gear pivot came loose but I don't have room to press it back in. Looks like I need replace. Do you have this part and can you direct me to installation video? Thanks

Please advise price and availability for this crank Thank you Wayne

Hi, We have a 1960's Florida home with a few remaining original awning windows. Trying to replace one of the Stanley Operators.We bought a replacement at ACE but realize we should have come to you first, hopefully you can see that the operator we have is centered in the caseing and the replacement w ... (cont.)

Can you please help me identify the replacement part for this item I have many that I would like to change out.

This has an offset main linkage off gear, holes for mounting are not critical but would be nice, so as not to retap screw holes. Just ordered many window parts. the patent #198202, on swisco theres a recommendation for that # but not a good match because no offset as clearly pictured. Thank you A ... (cont.)

Hoping you can match this. Holes top to bottom is 5 1/4" Hole gap at bottom is 1 7/16" Hole gap in connecting bracket is 2 1/4" There is an offset in the connecting bracket toward the inside. Handle says Stanley but none of the other handles on similar windows say anything. I can't find a mfg name ... (cont.)

Dear Swisco, I need to replace my Window Operator on my Florida Awning Windows in my Florida Room. The only Operator that is fairly close to mine is the 39-350My operator's arm though is off set and has a threaded piece at the end of the arm that slide into the hole in the shoulder and a nut to ... (cont.)

awning window operator with only two mounting holes. All help appreciated identifying.

I need a replacement crank. Do you have any like this?

My extended arm length from center of rivet to center of 3/8 hole is 2 1/16 to 2 1/8 long, NOT 2 3/8! Please advise a replacement operator. Operator circa 1964.

I'm trying to replace this part. I purchase part number 39-278 And it doesn't work. The window locks about 1 inch from closing all the way. What is the correct part number that I should've purchased? Can I return the parts I already purchased? Do you also sell the round clips?

OFFSET ARM 2 inch C-C 7/16 HOLE BOTTOM HOLES 1 3/8 C-C VERTICAL HOLES 5 1/4 C-C GREY I can't find markings on the window or the operator

I need replacement cranks for a few of my windows. Almost all are right hand link the one shown in the pictures but I do have a couple left. These windows were manufactured by Bass Window & Door in Princeton FL but the have been out of business for over 20 years. Please give my your part numbers ... (cont.)