Viewing all customer Discussions for:

39-058 Stanley Operator, Right Handed

Do you have this in a right handed?

Good morning. I'm restoring the original windows in my new home. Most important part I need is the bracket, which has a broken tab. It's about 5" in length.Judging by the another set of holes in the frame the crank might not be original. I might need one going forward as I've only started with th ... (cont.)

Hi I have a bunch of these old Jalousie windows. I am missing this complete operator part and for others I am missing the crank.

RH window measurements: 2 5/8" link, 5/16ths threaded bolt hole; link is longer than "gear" approx. 1/4" 1 5/16" between lower screw hole centers Distance between upper screw holes 3/8" 5 1/4" from top holes to bottom holes

pat.no.d-198,202 USRD 1963 CAN.11500-4I need handles for left an right..Mike

I have several aluminum 4 window pane tall awning windows (circa 1958-ish) which I am having trouble adjusting to fully close. After cleaning the side slides and the bottom rotating rod, the upper 3 panes close tightly, however, the bottom pane remains open approximately 1/4" after the operator is f ... (cont.)

Number 36373407 jalousie crankDo you have window cranks as on photos.

Handle no longer opens or closes window I sent another email with photos of window

I have this Stanley crank that I need a replacement for. I have attached pictures. It is the left crank. Would really like to replace both left and right cranks.

Need to find a new replacement as shown in the picture

I have attached 3 window crank pictures and a hand written picture of the logo and numbers printed inside the handle casing. The part number appears to be 11500-3 2 RH. Paten number appears to be D-198, 202 U 8. RD 1963 CAN. I need at least one replacement casing and hand crank, preferably 2 ... (cont.)

1955 home with an 1970 addition with HomeArt windows installed in tge addition. I'm missing two right hand cranks.Please advise, thanks.

I am trying to find two of these RH awning hand cranks or something close. I am mechanical engineer by trade so the dimension should be correct in the first picture. The second picture is being sent just to show you the lengths of the two pivot arms - my original side view picture got deleted. I ca ... (cont.)

awning, 5 1/4 in mounting top to bottom mounting, 1 1/16 in between 2 bottom holes, 2 5/8 in arm, 3/8 dia arm holethank you

My mom is looking for the mechanism for these windows. She needs about 12 of them total.

The only lettering/numbers found are "4714-1 w2" on the crank handle. Distance between bottom holes (1 3/8" apart) to top holes is 5 1/4" The link arm is 2"center-of-hinge to the center hole at the end. The link arm also has a manufactured bend in it.The housing is wedge-shaped in depth. 1 1/2" ... (cont.)

Looking for a replacement of this part. It now longer turns. Thank you

The crank replacement is for an old Howmet Aluminum Corp. which I believe was their Homet Plant Playroom. It is all aluminum: sides, ceiling with skylights and awning windows. Please help if at all possible.

Looking for replacement part

Looking for replacement window cranks for Aluminum Louvered Windows. I found a number on the inside of the window crank: 4714-B R. Please let me know if you have the replacement part. Thanks, Mike Y