Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

Looking to see if you guys can help with this. This one doesn't crank properly. Looking for new. Thanks.

Hi. Two of my operators have failed due to the bushings pushing out of the body of the operator. Photos are attached. The part number appears to be 45301. Do you sell a replacement part? Thanks, Chris

Aloha! Im the second owner of a Lindal cedar home in Kula, Maui, Hawaii. I have three window cranks I'd like to replace. The photos I included show the two that are similar, just open opposite directions. Please let me know if you need additional photos to determine what replacements I need. Th ... (cont.)

I have a contemporary 1980's built home with many crank style windows. Many of the circular crank center pieces are broken and will not open or close the windows. What is the correct style and replacement for these cranks, please. I am attaching two photos. Do I need to purchase the whole replace ... (cont.)

I am trying to fix this window crank. The handle with gear keeps coming out. I am assuming that the entire crank assembly needs replacing. Please advise.

This is Truth Hardware. Arms are just over 16" and have number 30896. They attach to a part number 45142, shown in picture W 2, that has 5 screw holes. It fits through an opening that is 4 5/8". The hinges click onto a part that is 3 "long--picture 3.

Pictures of adjacent window. Knurled crank mechanism is stripped inside housing so can't open window to remove sill or access parts. No names or numbers visible anywhere.

Looking for 2 each of the attached Truth Window Crank part number stamped on my window crank is 40510 and 40511

I am looking for the replacement handle and spindle for a Truth 45206 window hinge. Is this something you carry or can help me locate? Any help is greatly appreciated. This is for an area that has limited funding so I am trying to keep from having to replace the entire assembly.

Hello, I'm looking to replace the window crank because the "guts" do not stay in when cranking the window open or closed. Can you please let me know if this is something you have available or if you need additional information from me.Thank you,Ric

Hi, I was looking for help to replace the window parts I have uploaded. No names or numbers could be located on any of the existing hardware. Thank you for your assistance! Ed

Do you sell this

Hi one of my casement windows will crank open but not closed - it seems to be just the threaded brass fitting that is damaged - is this part available by itself? Thanks

Hi, I called MW manufacturing (now PlyGem). They told me the awning window used Truth hardware and was dual arm. I need some help identifying exactly what operator (and I will probably buy a new handle, as well) I should buy. Thank you! Mel

Crank broke. Bought from Menards in 1996. Shows 45301 truth on back.

The first 5 pictures is from a semco awning operator and the next 9 pictures are off a semco casement operator. The casement window opens left to right. If you need more info or pictures you can send by email.Thanks Rick

The arms connected to the window are about 9 1/4 inches. The arms connected to the mechanism are about 8 3/4 inches to the bend in the arm, then about 1 1/2 inches into the mechanism. The plate where the arms attach to the window is 4" wide. This is connected to a 12" plate on the window frame.The c ... (cont.)

This window is above the bathtub in the master bath. Unlike regular windows that swings left/right, this window goes down( closed position) and as you crank the handle it opens up. The crank handle has name "SealRite" written on it. Looking to replace this crank since does not work. One of the contr ... (cont.)

I installed two of the Bright Brass Operator Covers (39-322) for the casement windows and they look great.The two casement windows are Eagle (Eagle was purchased by Anderson) and are part of a Bay Window ? two casement and one awning window ? the Awning Window is also Eagle.The brass awning mechanis ... (cont.)

Basement window hardware - opens up and out