Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

Please provide part number, price, shipping cost and availability of pictured item

Hi - I am replacing covers and handles on several windows at home. Two windows have the cover shown, and an 11/32"crank. Should this cover just pop off or is there a set screw? And which is the right replacement cover in white? Thanks! Judy

The brass bushing failed and I need you're guidance in repairing the awning operator.

I'm looking for a part that apparently you don't have so here's a couple of pix. The part is labeled as this. Truth Casement Window Straight Arm Operator 40056. Right position. Thanks for your help!

I have tightened the little screw on the handle but that did not help. I believe the guts are just worn out! TYIA

Looking for a replacement for this window operator

I'm looking for replacement crank for this window. I'm not sure what brand of window is. Thanks Keith

Hoping you can help ID the replacement part for this window. Thanks for your help. -Peter

See pictures. Need to replace entire assembly. If exact part no longer available, please suggest closest current part.

I need to replace the operator and a new handle. It's made by Truth. Only numbers I see are 45301. It's 21.5 in long.

I need 4 21½inch duel arm crank operators, crank arm & handles. 45301 is on the bottom of crank operator, 0078 is printed on left arm assembly, 4007 printed on right arm assembly

Need a replacement piece for the one in the photos?. Tim

I have a pair of awning windows that won't open because of a subsequent installation of hot water baseboard heating that blocks the Lever. Is there an alternative operator I could replace them with, either a crank or offset lever? I broke the lever trying to bend it enough to clear the heating cove ... (cont.)

I'm looking for a replacement crank (operator) for my Awning windows. The windows are Anderson if that helps. Thanks for your expertise!

I have a customer looking for either a replacement crank for a casement unitor the whole part if that is the only way you sell it. It says "truth" onthe part. Is this something you can help me with.Thank youJoanneMethow Valley Lumber

The interior cranking mechanism shown in the photo does not crank the casement window all the way back in. There are two arms that are attached to the window that this crank extends and retracts but the interior part appears to be worn out or broken. I have six windows that need this same repair. ... (cont.)

I bought a condo and the window is 37x19.5 and the image shows the number, the crank style and that one scissor is approx 8 in from the center crank to where it hinges open. Thanks for letting me know what two replacements would cost and what will work

I have to order 2 more 39-239B I also need 2 that have the crank in the middle of the unit and it extends 8 inches or so. Same clips as 39-239B

Hi,I'm looking for a replacemnet awning opperator for my Window Master window (about year 2000)Let me know if something you have will fit.Thank you,Brett

Good Afternoon, I am wondering if you think it is possible to cover these casements with one of the Truth Hardware covers? The windows are Milgard approximately 30 years old. To remove the casements, we would have to take out the sill and I am reluctant to take this step. Also looking to change ... (cont.)